Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Dead FWT, FXO line

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 24th June 2011 at 02:32 #32037
    Marvel
    Guest

    I have a quintum AXT 2400 with FXO line. Im using it as termination call. I have a question about dialing
    FXO when 1 of port is dead condition.

    For example : As the normal that opened 8 port line FXO, connected to 8 FWT then i config maaping to 8 port too. If some FWT dead, All call termination still routing to the FWT dead and make alarm cause code 41. Im using Ascending round robin as rotation call.

    The question is, how to config Quintum if some FWT dead also Quintum can detect dead FWT then no alarm again ? So we dont need to config the quintum to disable dead fwt.

    Thanks,
    Reg,
    Marvel

    25th June 2011 at 16:25 #32038
    MikeM to Marvel
    Guest

    Marvel,

    Analog lines do not provide any indication if they are working or not. There is no way for the quintum to know if the fwt port is good or not before it tries the call.

    MikeM
    mike_voip@hotmail.com

    27th June 2011 at 00:15 #32039
    Marvel
    Guest

    Dear Sir,

    Thank you for the answer 🙂

    Thanks,
    regards,
    Marvel

    28th September 2011 at 13:13 #32040
    Emmanuel Ssempa
    Guest

    Hi Marvel! I am trying to do a similar thing using FWTs and Grandstream FXO.

    But in my case I am totally failing to get it to work. I may need your help. We can also discuss some alternatives.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.