Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Withheld CLI Quintum DX2030

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 11th January 2010 at 16:01 #31954
    HAL
    Guest

    Hi Mike,

    Could you tell me please how to restrict the CLI on the Quintum DX2030?

    Thanks and regards

    11th January 2010 at 23:17 #31955
    MikeM to Hal
    Guest

    There is an option under the Ethernet Interface called Management Access. If you set this to 0, telnet and ftp will be disabled.

    You better make sure your config manager is working correctly or you will need to connect direct via console connection.

    MikeM
    mike_voip@hotmail.com

    12th January 2010 at 08:42 #31956
    HAL
    Guest

    Thanks Mike this is as well a very helpfull answer, but I asked about hiding the Caller ID. Withheld caller ID doesn’t work even if it is restricted from the originator side which is us. Is there any function in DX2030 tells me this should restrict the caller ID? I’m still not getting in touch with our Termintor to check whith him the ISUP message, may be he ignores the restrict function.

    Thanks and regards

    13th January 2010 at 12:43 #31957
    HAL
    Guest

    Issue solved for my case. I added the caller ID which I want to restrict in Nubmer Pattern in Caller ID Translation Directory, and I left the Replacement Number blank.

    Thanks and Regards
    HAL

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.