VoIP bandwidth calculator...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Tenor IVR type 1 for A800 and AX

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 1st February 2009 at 23:17 #31873
    Ljubo
    Guest

    Hi,
    I have two Tenors A800 and AX 8 ports

    1. Dose anyone has experience if A800 could work as SIP with SIP FW. If yes are there any limitations. As well where I can get CLI for this SIP version of FW for A800?
    2. Could I programe A800 and AX for 2 stage dial in scenario? No need for IVR/RADIUS, only PIN if necessary.
    I need that calls from pstn to specific FXO port to be forwarded to predifined destination in other network. Could it be done by “forcediprouting” command for A800?
    3. Could I make that specific SIP client call are routed directly to predefined PSTN user
    Many thanks
    Ljubo

    2nd February 2009 at 22:16 #31874
    Ljubo
    Guest

    Hi,
    Did I ask for impossible scenario or there are no solution.
    I would appreciate any hints on this.
    br

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.