- This topic has 6 replies, 1 voice, and was last updated 16 years, 11 months ago by
.
-
Posts
-
Hy,
i have a DX2060 connected via 2 E1 to a Pbx, the pb is when making calls some of them disconnect and when i see the logs i found cause=34, i try to fix the pb but i have no idea about this, if you have any idea plz send it to me
Thanks
cause 34 is generally caused when calls come from IP but the quintum cannot find a match for the incoming digits in the config.
MikeM
mike_voip@hotmail.comthank you for your feed back
From your experience how can i fix this pb ? have i add some configuration in the quintum ?i did a small search about the cause 34 and i found that there is associated to “no circuit/ channel available”, but i have 2 E1, so they can ensure 60 simultanously calls, and for my structure i do between 40 and 50 at max simultanously calls, but there is always a cause 34
I have responded to your email.
Mike
Yes thank you so much,
but i just want to know where is the cause of the pb, that’s all!And I provided as much information as I could with the little information you provided me. Consider this problem;
“my car won’t start, what is the problem?”I gave you somethings to look and check on such as the hop off and/or local directory number config may not be matching the incoming digits. That is many times the reason for this cause. If it is not that it could be many other things and I would need more information.
MikeM
mike_voip@hotmail.com
- The forum ‘Voice over IP’ is closed to new topics and replies.
