Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Quintum configuration

  • This topic has 1 reply, 1 voice, and was last updated 17 years ago by MikeM to Mazher.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 9th November 2007 at 12:18 #31596
    Mazher
    Guest

    Hello everybody,

    I need your help regarding the following configuration. Please help me guys. I am new and I dont now how to configure this setting.

    1) I have a tenor A400 and 4 PSTN connected. On the other end i have IP Phones IP Telianna/Cisco ATA 186. I want to make a calls from IP Phones through tenor A400 PSTN lines. What configuration should be done on both Tenor and IP Telianna/Cisco. Please write step-by-step configuration.

    2) I have another tenor A800 gateway want to use on Call Center. How to configure this gateway for IVR.

    Please reply me with “Step by step configuration” in details.

    Thanks and best regards.
    Mazher.

    9th November 2007 at 14:12 #31597
    MikeM to Mazher
    Guest

    Mazher,

    1. This should be no problem using the hop-off feature.

    2. More information would be needed to understand the config.

    Both can be accomplished, but to reply with step by step here is not practical. If you would like the full configuration, please contact me directly at mike_voip@hotmail.com

    MikeM
    mike_voip@hotmail.com

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.