- This topic has 5 replies, 1 voice, and was last updated 16 years, 11 months ago by
.
-
Posts
-
How can i change ports in A800 & Axt
you cannot change the ports in an A800.
In AXT, you must edit the var_config file (ftp it from the unit) and set the H323port, send it back to the unit and perform a varconfig update.
MikeM
mike_voip@hotmail.comis ther any possible to stop telnet in AXT ? And pictular ip`s to allow telnet
You can stop all telnet access by setting disabling the managementaccess command.
You cannot restrict telnet by IP.
MikeM
Mike_voip@hotmail.comHi Mike, Could you pls explain a bit detail how to manupulate H323 port in AXT? I mean how to ftp var_config file, edit h323 port and how to perform varconfig update? And is it applicable to AXTs only or can be done in DX and CMS as well?
Thank you.the command works in all generation 2 units.
if you need specific directions to do this, please email me directly.
MikeM
mike_voip@hotmail.com
- The forum ‘Voice over IP’ is closed to new topics and replies.
