Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Quintum DX2060

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 22nd September 2006 at 03:19 #31117
    JavierY
    Guest

    Please, I have a weir problem on my DX2060, I can dial to local and country calls, but International dialing is allways not complet, as soon as I call, after 2 seconds I get busy tones.

    Any Ideas? I-m using Mexico R2 MFC signaling… I populate from quintum country codes, I only modified the dnisl.

    22nd September 2006 at 12:37 #31118
    MikeM to JavierY
    Guest

    Javier,

    If you are term calls to the R2 line, maybe the dialing pattern is not correct or the phone company is not allowing the call. If you are orig calls, then maybe the term point is not set for this. The only way to know for sure is to review a call log in real time to see what is exactly happening.

    Mike M
    mike_voip@hotmail.com

    6th October 2006 at 07:28 #31119
    Teodor Georgiev
    Guest

    JavierY,

    what Mike said is the most adequate reason for your international calls being dropped.
    Check with the PTT the international dialing format.

    Then run a debug on the Quintum (evlog +ch) and see how Quintum is sending the number to the other side.

    6th October 2006 at 12:24 #31120
    MikeM to Teodor
    Guest

    Long time no post Teodor.

    Welcome back.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.