Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

pbxtg

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 13th October 2005 at 08:26 #30277
    amb
    Guest

    hi,
    everybody.special thanks to Mike.i create new pbxtg in analog 800 but all the channels in new tg is disable.pls help me. how i use the channel to configue?

    13th October 2005 at 19:59 #30278
    MikeM
    Guest

    Amb,

    YOu need to go to the first trunk group that was created and disable the channel(s) that you want to move to the 2nd, using the command dis 1 x (where x is the channel number to disable). Then go to the new Tg and enable the channels by typeing ena 1 x (where x is the channel number).

    If you need further assistance, you may email me direct at mike_voip@hotmail.com

    16th October 2005 at 06:01 #30279
    amb
    Guest

    Thanx Mike,i am really greatful and i think you help me in future.and last of all i thank once again.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.