Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

How to make SER+Vovida B2BUA with Alepo

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 26th September 2005 at 12:48 #30209
    Thomas Tomter
    Guest

    Hello,

    We are now trying to integrate SER+Vovida B2BUA with Alepo RBS version 4.2. Do anyone have some experience with this?

    In case, would it be possible for to share with us how SER + B2UBA was configured in order to make this work? We are particularly interested in making SER+B2BUA act as a Cisco device towards the Alepo billing system.

    Thanks in advance.

    Best regards,

    Thomas Tomter

    30th September 2005 at 13:50 #30210
    Andrew Zhilenko
    Guest

    I can tell you that after working with Vovida B2BUA for almost two years, doing a lot of patching/customization/bugfixing we finally gave up and created our own B2BUA from the scratch.

    3rd October 2005 at 11:13 #30211
    Thomas Tomter
    Guest

    Hello Andrew,
    Thank you for your response. Were you able to make your B2BUA work with Alepo RBS? (Which version of Alepo RBS did you run?)

    If yes, did you have to alter any settings in the Alepo RBS and add new dictionary-files, or alter the SER-configuration?

    Is your B2BUA available as open-source?

    Thanks in advance.

    Best regards,

    Thomas Tomter

    3rd October 2005 at 16:24 #30212
    Andrew Zhilenko
    Guest

    The project I am referring to is PortaSIP, so it was primarily integrated with PortaBilling. Although all the communication between the SIP server and the billing is done via RADIUS, so potentially it should be possible to use PortaSIP with any other RADIUS/billing.
    Our B2BUA (as well as other modules) is provided with source code to our customers.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.