VoIP bandwidth calculator...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Help with complicated setup

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 19th September 2005 at 13:32 #30158
    Paul Grimshaw
    Guest

    Hello,

    History:
    I have a business that has 5 locations, each location currently has 2 PSTN lines (1x ADSL’d). As it happens I already have DrayTek Vigor 2900VGi’s which are VoiP ready.

    Requirement:
    I would like one number that is available to customers who will then choose the store they want (by voice prompt) and it will then be redirected over VoiP. The store needs to dial out by either dialing 9 and then a PSTN number or a short code (001?) if dialing internally.

    So:
    Can you recommend any companies who can do this all and also cut the cost of the phone calls themselves?

    Thanks,
    Paul.

    19th September 2005 at 15:29 #30159
    Wilson Boyrie
    Guest

    I looked up the DrayTech Vigor router, and they are ready for almost anything but VOIP.
    Thy are firewall, router, VPN endpoint,wireless,NAT,Switch, but not a mention about VOIP.

    Questions: Do you have static I.P. addresses on those ADSL lines???
    Where are you located at???

    Best regards.
    Wilson Boyrie.

    20th September 2005 at 08:41 #30160
    Paul Grimshaw
    Guest

    Hi,

    Sorry, I made a typo, its the Vigor 2600VGi. We have static IPs at all locations (we use VPN so its easier). We are based in Middlesex.

    Thanks,
    Paul.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.