- This topic has 1 reply, 1 voice, and was last updated 19 years, 4 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hello again:
Is it possible that my ring-tip cable lead from my telco is just reversed, that I cannot detect the dialtone on the A800 when I do the “test o X”
Many thanks,
John
John,
Typically, the polarity of the analog cable does not matter, at least in the US it usually does not matter.
You can try a couple of things.
1. Verify that you do not have voice mail on the analog lines so that they have a stutter dial tone. The Tenors cannot detect this.
2. If this only happens on 1 or 2 analog ports, try swapping lines/ports around to verify if the ports have gone bad on the Tenor.
3. If you are using a GSM unit, make sure that everything is properly grounded.
Mike
Viewing 2 posts - 1 through 2 (of 2 total)
- The forum ‘Voice over IP’ is closed to new topics and replies.
