Cisco + Stargate GSM configuration

We have a problem with our Stargate GSM gateway. We can do test calls from Stargate management program but we have unable to use it through cisco with OpenPhome (h323). We take messages like “service not available ” from Stargate debug output. I think we have problem with cisco config.
#########################################
!
! Last configuration change at 12:32:57 UTC Thu Mar 31 2005 by alilazim
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname xxxxx
!
aaa new-model
aaa authentication login admin local
aaa accounting update newinfo
aaa accounting connection h323 start-stop group radius
enable secret 5 xxxxxxxxxxxxxxxxxxxxxx.
enable password 7 xxxxxxxxxxxxxxxxxxxx
!
username foo privilege 15 password 7 xxxxxxxxxxxxxxxxxxxxxxxx
username fooo password 7 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
memory-size iomem 10
voice-card 3
codec complexity high
!
ip subnet-zero
no ip source-route
ip rcmd rcp-enable
!
!
no ip domain-lookup
!
no ip bootp server
isdn switch-type primary-net5
call rsvp-sync
voice call send-alert
!
voice service pots
!
voice service voip
fax protocol t38 ls-redundancy 0 hs-redundancy 0
!
voice class codec 1
codec preference 1 g729r8
codec preference 2 g729br8
codec preference 3 gsmefr
codec preference 4 gsmfr
codec preference 5 g711ulaw
codec preference 6 g711alaw
codec preference 7 g723ar63
!
voice class codec 2
codec preference 1 g729r8
!
voice class codec 100
codec preference 1 g729r8
codec preference 2 g723r63
codec preference 3 g729br8
codec preference 4 g711alaw
!
!
!
voice class h323 100
call start fast
!
!
!
!
controller E1 3/0
clock source line primary
pri-group timeslots 1-31
!
controller E1 3/1
!
gw-accounting syslog
gw-accounting h323 vsa
gw-accounting voip
translation-rule 200
Rule 0 % 1232232
!
!
!
interface Ethernet0/0
description “LAN”
ip address XXX.XXX.XXX.XXX 255.255.255.248 secondary
ip address XXX.XXX.XXX.XXX 255.255.255.248
full-duplex
!
interface Ethernet0/0.1
!
interface Serial0/0
description Falcon Stream IRQ-BGD-188 Dublex
bandwidth 1024
no ip address
encapsulation frame-relay IETF
load-interval 30
no keepalive
no fair-queue
ignore-dcd
serial restart-delay 0
!
interface Serial0/0.1 point-to-point
description Falcon stream IRQ-BGD-188 Dublex
bandwidth 1024
ip address XXX.XXX.XXX.XXX 255.255.255.252
frame-relay interface-dlci 101 IETF
!
interface Serial3/0:15
no ip address
encapsulation hdlc
no logging event link-status
isdn switch-type primary-net5
isdn protocol-emulate network
isdn incoming-voice voice
isdn negotiate-bchan resend-setup
isdn sending-complete
no isdn outgoing display-ie
no cdp enable
!
ip classless
ip route 0.0.0.0 0.0.0.0 XXX.XXX.XXX.XXX
no ip http server
!
logging source-interface Ethernet0/0
!
snmp-server community public RO
snmp-server enable traps tty
radius-server host XXX.XXX.XXX.XXX auth-port 1812 acct-port 1813
radius-server retransmit 10
radius-server key 7 xxxxxxxxxxxxxxxxxxxxxxxxxx
radius-server authorization permit missing Service-Type
radius-server vsa send accounting
!
voice-port 3/0:15
echo-cancel coverage 32
cptone TR
bearer-cap Speech
!
dial-peer cor custom
!
!
!
dial-peer voice 100 voip
incoming called-number 009647T
voice-class codec 100
voice-class h323 100
no vad
!
dial-peer voice 200 pots
destination-pattern 00964790T
direct-inward-dial
port 3/0:15
prefix 0790
!
gateway
!
banner motd ^CEn buyuk router bizim router^C
!
line con 0
line aux 0
line vty 0 4
!
ntp clock-period 17179748
ntp server XXX.XXX.XXX.XXX
ntp server XXX.XXX.XXX.XXX
end

#########################################