VoIP bandwidth calculator...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

gui interface in quintum 2024 doesn’t wo

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 17th July 2004 at 21:20 #27653
    CM Rahman
    Guest

    Hi,

    Anybody how to get the Gui interface (tenor cam) via browser to work? In mine, it is not working.

    Thanks

    18th July 2004 at 05:08 #27654
    Noname
    Guest

    Look trought the CLI and look for a filed called “disable gui”

    Someone might have it turned off before.

    Anyway, you are not loosing much. The GUI is a piece of bad engineering.

    I will stay away from the GUI, and mine works fine.

    Good luck!!!!

    Here is the setting:

    Primary Time Server: IP Address = 0.0.0.0
    Secondary Time Server: IP Address = 0.0.0.0
    UTC Offset: Unknown

    Disc Tone Frequency: 480 Hz (min) : 620 Hz (max)
    Disconnect On/Off Time: 250 mSec(on) : 250 mSec(off)

    Call Indication Tone = None(0)
    Disable GUI = no(0) This is enabled

    21st July 2004 at 08:53 #27655
    Teodor Georgiev
    Guest

    Better stay away from the WEB management interface for A/D tenor series. Will cause you a lot of headaches.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.