Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Tenor A800 and IP Phone

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • 17th June 2004 at 05:24 #27436
    Zaman
    Guest

    Hi
    I have a tenor A800 and 8 PSTN connected.On the other end i have IP Phones like IPStar Phone.what i want is that the ip phones to connect to my tenor and make calls using my 8 PSTNs.Is it possible?It’s an emergency.Please help me.

    18th June 2004 at 06:01 #27437
    Noname
    Guest

    For what i understand the IPstart are not H323 compatible.

    Last time that I checked, those phone are propietary, they do not talk to anything but another phone of the same type.

    But I am not expert on IPStart phones at all. Ask the vendor of those phones if they are H323.

    If they are, you have a chance, but still not a guaranty.

    Best luck!!!!

    19th June 2004 at 10:08 #27438
    Zaman
    Guest

    Thanks a lot Noname.

    But can u give a solution what gateway device to use with IPStar or InterStar phones?

    19th June 2004 at 17:29 #27439
    Noname
    Guest

    I never worked with the units myself, but I remember on the early days of my research on VOIP (two to three years ago), i was interested in finding a gateway that will work with the IP start and the dial up version.
    What I found at that moment is a gateway that will be compatible with the phones, but it is not a H323 solution and the price that I was quoted was out of these world (100.000 dollars for a 2 T1 gateway).
    At that point, it did sounded like the people that try to sell that equipment where a little bit out of these world.
    I never heard about any compatible gateway besides that one, and I have since that worked only with H323 gateways and phones.

    Unless you have a unlimited and free supply of those phones, it may be better for you to go with a H323 or SIP plataform

    Best wishes.

    20th June 2004 at 07:30 #27440
    Zaman
    Guest

    Many thanks Noname.

    I’ve found some gateways made by DSG Tech.IP1200 and IP1000.But don’t know where to buy.Can u provide me some detail about these.
    So sorry to disturb u again as i’m not an expert on VOIP devices.

    21st June 2004 at 07:29 #27441
    Devy
    Guest

    DSG Tech.IP1200 and IP1000

    Go to http://www.dsgtechnology.com/contactus.html

    And ask for buy conditions!

    Best regards ,
    Devy

    21st June 2004 at 07:33 #27442
    Devy
    Guest

    In USA you can contact at.

    DSG Technology USA20265 Valley Blvd., # NWalnut, CA 91789Tel :1.909.5958908Fax:1.909.5955508E-Mail:sales_na@dsgtechnology.com

    ;))

    21st June 2004 at 12:30 #27443
    Noname
    Guest

    I agree to the addresses. Sounds like the people that I dealt with in the past.
    Will be interesting if you post your results back into this page, whenever you get a prie quote.

    The posibility of geting VOIP over dial-up lines, like one of the DSG products still an advantage in some places.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.