VoIP bandwidth calculator...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

E164 and A800

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • 19th March 2004 at 07:31 #26707
    Linman
    Guest

    I have configured A800 to register with my GK using E164 id as 55667788. When i place a call to A800 using the same id, the call got rejected by the A800. Find below the log from A800.
    —–
    CH : 59069930:h323[0]: h323mgr:RcvIncomingCall
    CH : 59069947:h323[0]: ocall:RcvSetup, my media type=9
    CH : 59069947:bandwidth info: max=-1 cur=12600.
    CH : 59069947:Fast start element present.
    CH : 59069947:Setting remote rtp port=W.X.Y.Z:23566.
    CH : 59069947:Remote side packet saver version = 2.
    CH : 59069947:CallInfo[0xd8ac30]: origCalled.digit(55667788)
    .
    CH : 59069947:h323[1512/0]: ocall:stackSendCallProc
    CH : 59069950:Routing requested for: public(0) orig=55667788 public(1) norm
    alized=55667788 route code= tg=0.
    CH : 59069950:0 match(es) found:
    CH : 59069950:Route response(1512): result=0 cause=34.
    CH : 59069950:CallInfo[0xd8ac30]: cdr callid(5e8) rmtcallid(0) calltype(1) d
    estnumtype(1).
    CH : 59069950:CallInfo[0xd8ac30]: cdr dest(55667788) orig(2000 4) remote()
    pin().
    CH : 59069950:CallInfo[0xd8ac30]: cdr icline(ffffffff) icport(cb91be03) otli
    ne(ff) otport(1).
    CH : 59069951:CdrManager::addCdr: 1185 Return.
    CH : 59069951:CallInfo[0xd8ac30]: sendFailed Event cause=34.
    CH : 59069951:CdrManager(0x5d13c4): account =A.B.C.D.
    CH : 59069951:CdrManager[0x5d13c4]: cause =34.
    CH : 59069951:CdrManager[0x5d13c4]: send stopAccount.
    —

    Any clue???

    19th March 2004 at 08:32 #26708
    www.blue-lava.co.uk
    Guest

    From the same prompt can you type gk table for us to see what is the given format?

    Regards

    dwray@blue-lava.co.uk

    19th March 2004 at 10:03 #26709
    Linman
    Guest

    Please find the result below:

    Quintum:UNIT1> gk table
    Quintum:UNIT1> Quintum:UNIT1>
    Zone DirectoryNumbers
    Public DirectoryNumber Tree
    Private DirectoryNumber Tree

    Network DirectoryNumbers
    Public DirectoryNumber Tree
    Private DirectoryNumber Tree

    22nd March 2004 at 06:38 #26710
    Teodor Georgiev
    Guest

    You have to setup also LAM or LDN numbers on the trunk group so, quintum will know where to temrinate the call.

    LAM is for FXO lines, while LDN is for FXS ones.

    Simply said 🙂

    22nd March 2004 at 10:35 #26711
    linman
    Guest

    Cud u guide me to setup LAM or LDN numbers on the trunk group.

    23rd March 2004 at 08:22 #26712
    Teodor Georgiev
    Guest

    On Quintum website you can download freely their documentation.

    28th May 2005 at 05:59 #26713
    Dode
    Guest

    Hi All,

    i have a Quintum 2 ports and 4 ports.
    I am facing a problem in applying a telephone numbers (identifing numbers) to the unit ports, can any one help?

    Appreciating,,

    10th June 2005 at 01:28 #26714
    LoneRanger
    Guest

    CH : 59069950:0 match(es) found:
    CH : 59069950:Route response(1512): result=0 cause=34.

    Your Tenor does not know where to send this call internally. You need to have the incoming number in the pbxtg 1# huntpubldn 55667788

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.