Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

PROGRESS TONE QUINTUMA400

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • 20th February 2004 at 17:28 #26520
    FREDERIC PERUT
    Guest

    I have a A400 set up with H323 and talking to CISCO AS5300.
    The Quintul does not give me back the progress tone (or ringing tone).
    However the CISCO sends back the ALERT signal correctly; and when calling from a ATA186 I do get the ringing tone.

    Do you know how to configure the Quintum in order to have the ringing tone ?

    24th February 2004 at 13:13 #26521
    www.blue-lava.co.uk
    Guest

    Frederic,

    in the pbx and pstn tg level of config you need to enable call progress tones.

    you may also need to add progress indicators in the h323gw part.

    any questions just ask

    dwray@blue-lava.co.uk

    26th February 2004 at 08:35 #26522
    FREDERIC PERUT
    Guest

    Thank you for your kind feed back.

    Could you pls tell about the following ?

    1- QUINTUM box generates locally the ring back tone after reception of ALERT message (encapsulated in H323)

    2- OR does it just let pass the ring back tone that is generated by the remote CISCO 5300 or remote PSTN Switch for example ?

    3- Is there anyway the Quintum box can generate locally the ring back tone, what ever the situation (even without reception of the ALERT msg), such that the caller does not panick & wait until reply of the called part ?

    Many Thanks

    26th February 2004 at 15:19 #26523
    Carolina
    Guest

    I`ve got the same problem I need to know how can I produced the ringing tone in the Quintum AS800

    Send me information to my email vitaes11@hotmail.com

    2nd March 2004 at 22:37 #26524
    Teodor Georgiev
    Guest

    it is much better idea to avoid turning on the “fake” progress tones at the trunk group (progtone 1).
    This (on analog tenors) can interfere with the voice based answer/disconnect supervision.

    Better do this:

    config
    h323gw
    progindalert 1

    T.G.

    10th May 2004 at 18:05 #26525
    A.B
    Guest

    I tried the …
    config
    h323gw
    progindalert 1

    although it does not work. is there any other configs that have to enabled.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.