Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Quintum Tenor and OpenAM

Viewing 5 posts - 16 through 20 (of 20 total)
1 2
  • Author
    Posts
  • 10th April 2004 at 23:01 #26227
    Alhakim
    Guest

    Dear all,
    I havesame proble of Mr Gulzar
    i have A800 and need make call to it from netmeeting.
    but when send the call it reject after 5 or 6 second .
    how i can sove this problem?
    Note : i open my ip in tenor and use valid LAM pattern.

    20th April 2004 at 12:01 #26228
    moudar
    Guest

    we achieve many services (DID callack, WEBtrigger,….), when i was tried to pass a DID callback throught E1 trunk, the leg A of the call succeded, but when i received the request on the redirect number (legB),I answered and i entered the destination, but here and on the gateway log i sot that the destination number entered is incorrect.
    for example i entered 9613216771 on the gateway log displayed as 96612216677711.
    so please can somene help me?
    thank you

    15th November 2005 at 05:53 #26229
    Alex
    Guest

    Hi ppl!

    Anybody know how to get count of online users using SNMP on Quidway A8010 Expert?

    Thank you!

    6th November 2009 at 18:02 #26230
    George
    Guest

    Hello!

    I need some help with quintum cofiguration.

    I have Tenor AXE2400 with 24 FXS and 2 FXO.

    1. I want that incoming (PSTN FXO) calls to be able to go only to FXS port 1. I already configured it like this: TCRG and LCRG, pass through: enabled, block of channels, and incoming call goes to port 1. Is it enough? If have better solution, please tell me.

    2. I need to be able to transfer incoming calls (from FXO and FXS) to other number (Which is already configured in the gateway). for example I need first call to transfer to xxxx01, second call I need to transfer to xxxx02. I configured unattended transfer but, could not made any transfer. May be there is another way or unattended transfer more complex configuration.

    3. Also, if I need to use two or more Tenors, how I configure FXO port. for example in first Tenor I plug PSTN line to FXO-one, how I configure it for second Tenor.

    Please help me to solve this issue.

    Thank You

    28th January 2010 at 10:21 #26231
    John to George
    Guest

    Hi,

    1. I want that incoming (PSTN FXO) calls to be able to go only to FXS port 1. I already configured it like this: TCRG and LCRG, pass through: enabled, block of channels, and incoming call goes to port 1. Is it enough? If have better solution, please tell me.

    — you can do force route instead.

    2. I need to be able to transfer incoming calls (from FXO and FXS) to other number (Which is already configured in the gateway). for example I need first call to transfer to xxxx01, second call I need to transfer to xxxx02. I configured unattended transfer but, could not made any transfer. May be there is another way or unattended transfer more complex configuration.

    — This is a PBX feature. Quintum cant transfer call from fxs to another fxs in one box.

    3. Also, if I need to use two or more Tenors, how I configure FXO port. for example in first Tenor I plug PSTN line to FXO-one, how I configure it for second Tenor.

    — well you can do is example in 1st quintum assign 9 the other is 8.

    best regards,
    John Simon

  • Author
    Posts
Viewing 5 posts - 16 through 20 (of 20 total)
1 2
  • The forum ‘Voice over IP’ is closed to new topics and replies.