Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Voice mail signal for Avaya

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 15th January 2004 at 20:55 #26159
    George
    Guest

    Can someone help me figure out what kind of signal to send from Qtelnet to the Avaya 6221 analog phone and make the voicemail light to light up? If you know the specs of the signal needed, please email me or post it here. It should be in miliseconds but what???
    Nobody seams to know. I have tried 300ms and 500ms and 200ms with out any results

    George

    16th January 2004 at 17:14 #26160
    Dan C
    Guest

    I ran across that recently too. Avaya uses a proprietary VMWI signal, so Qtelnet cannot pick up on it and transmit it. Neither can anyone else in the industry. IE if you put a Panasonic phone with a VMWI light onto one of the Avaya extensions, the light will never light. Only Avaya phones work.

    Sorry couldnt be of more help.

    16th January 2004 at 17:17 #26161
    George
    Guest

    That is so bad. It seams that Qtelent retransmits the signal but it is apperantly wrong .

    Avaya told me it is proprietary. Grrrrrrrrrr.

    Thank you for your help.

    George

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.