Hard reset ws100

Solphone System Boot

Copyright 1984-1998 Wind River Systems, Inc.

CPU: Solphone3004 – MPC850
VxWorks Version: 5.4
BSP version: S1.3/Build 08
Creation date: Nov 6 2000, 18:14:08

Press any key to stop auto-boot…
7

BOOT> help

? – print this list
@ – boot (load and go)
p – print boot params
c – change boot params
l – load boot file
g adrs – go to adrs
d adrs[,n] – display memory
m adrs – modify memory
f adrs, nbytes, value – fill memory
t adrs, adrs, nbytes – copy memory
e – print fatal exception
b – set auto-start level to 0, 1, or 3
C – Clean Golden Gateway Configuration
T – set the DSP type for GG
v – view Telogy’s boot record
G – set default gateway
n netif – print network interface device address
N – set ethernet (MAC) address
$dev(0,procnum)host:/file h=# e=# b=# g=# u=usr [pw=passwd] f=#
tn=targetname s=script o=other
Boot flags:
0x02 – load local system symbols
0x04 – don’t autoboot
0x08 – quick autoboot (no countdown)
0x20 – disable login security
0x40 – use dhcp to get boot parameters
0x80 – use tftp to get boot image
0x100 – use proxy arp

available boot devices:Enhanced Network Devices
cpm cpm

So far ,I found two way to boot ws100 fxs from TTL port
1.Diagnostics mode

before ws100 is reseted.change RxD on TTL side with Ground.when you get a stable Dark Green window.change the Rxd back.So you can input any command.

2.Normal boot mode.

You can change boot parameter by command ‘c’.
soft reset by ‘g 10000′.

however,I can not find any command like NIOP ,PFLASH end etc. to update firmware.’c’ command does not work with TFTP even though I had tried every combination.so far I can not boot my box by staying on LED 3.

I really appreciated if there is any one who can tell me how to enter NIOP mode!

film_montreal@hotmail.com

Finnaly.I open anothernew box and found its boot paratemer is as below:

boot device : flashcpm0
processor number : 0
host name : SOLPHONE
file name : updater.ftp
inet on ethernet (e) : 192.168.10.2:ffffff00
inet on backplane (b):
host inet (h) :
gateway inet (g) :
user (u) :
ftp password (pw) (blank = use rsh):
flags (f) : 0x8
target name (tn) :
startup script (s) :
other (o) :

I just copy this exactly,and the bad box can boot up. but there still something to be dealed with.

Solphone System Boot

Copyright 1984-1998 Wind River Systems, Inc.

CPU: Solphone3004 – MPC850
VxWorks Version: 5.4
BSP version: S1.3/Build 08
Creation date: Nov 6 2000, 18:14:08

Press any key to stop auto-boot…
0
auto-booting…

boot device : flashcpm
unit number : 0
processor number : 0
host name : SOLPHONE
file name : updater.ftp
inet on ethernet (e) : 192.168.1.4:ffffff00
flags (f) : 0x8

Accessing FLASH…
Recognized Telogy’s file format:
———————————–
Code length: 0x0012A601
Offset: 0x00000024
Destination Address: 0x00010000
Executable Address: 0x00010000
Header check Sum: 0x0014A625
Code check Sum: 0x09D08F96
Next header offset: 0x00000000
Options: 0x00000001
———————————–
Calculating header checksum…OK
Verifying image checksum in FLASH…OK
Compressed image. Decompressing…OK
Starting at 0x10000…

Target Name: vxTarget
User: target
Attached TCP/IP interface to cpm unit 0
Attaching network interface lo0… done.
[1] dhcpcLibInit() has been done successfully.
dhcpcConfigSet() has been done successfully.
NFS client support not included.

Adding 6671 symbols for standalone.

]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]] ]]]] ]]]]]]]]]] ]] ]]]] (R)
] ]]]]]]]]] ]]]]]] ]]]]]]]] ]] ]]]]
]] ]]]]]]] ]]]]]]]] ]]]]]] ] ]] ]]]]
]]] ]]]]] ] ]]] ] ]]]] ]]] ]]]]]]]]] ]]]] ]] ]]]] ]] ]]]]]
]]]] ]]] ]] ] ]]] ]] ]]]]] ]]]]]] ]] ]]]]]]] ]]]] ]] ]]]]
]]]]] ] ]]]] ]]]]] ]]]]]]]] ]]]] ]] ]]]] ]]]]]]] ]]]]
]]]]]] ]]]]] ]]]]]] ] ]]]]] ]]]] ]] ]]]] ]]]]]]]] ]]]]
]]]]]]] ]]]]] ] ]]]]]] ] ]]] ]]]] ]] ]]]] ]]]] ]]]] ]]]]
]]]]]]]] ]]]]] ]]] ]]]]]]] ] ]]]]]]] ]]]] ]]]] ]]]] ]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]]]] Development System
]]]]]]]]]]]]]]]]]]]]]]]]]]]]
]]]]]]]]]]]]]]]]]]]]]]]]]]] VxWorks version 5.4
]]]]]]]]]]]]]]]]]]]]]]]]]] KERNEL: WIND version 2.5
]]]]]]]]]]]]]]]]]]]]]]]]] Copyright Wind River Systems, Inc., 1984-1999

CPU: Solphone3004 – MPC850. Processor #0.
Memory Size: 0x800000. BSP version S1.3/Build 08.

MXP environment is created.
-> Creating Golden Gateway application…
0000000241 – NMM: ATPM Update Database Granted
0000000341 – NMM: ATPM Configured From Flash
0000000342 – NMM: ATPM Update database done
0000000346 – TSG: 0, Coding Profile 0 is undefined
0000000346 – NMM: 0, Port Not Configured
0000000346 – TSG: 1, Coding Profile 0 is undefined
0000000346 – NMM: 1, Port Not Configured
0000000347 – TSG: 2, Coding Profile 0 is undefined
0000000347 – NMM: 2, Port Not Configured
0000000347 – TSG: 3, Coding Profile 0 is undefined
0000000347 – NMM: 3, Port Not Configured
0000000349 – HSMU: Created.
0000000374 – Registering terminal alias h323_ID “Solphone Preferred Customer”.
0000000727 – Reporting configured audio profiles:

I am still wondering how to update firmware,I take a wide guess that maybe there should be a boot script to load the file “boot_3r4.ld” and “ip_fxs_3r4.ld”. as I had never succed in loading any of them manually.
there is a url maybe helpful:
http://www.xs4all.nl/~borkhuis/vxworks/basicNetConfiguration.txt

when you search on google by key words GW3004, you will find that there have been SIP firmware for GW3000 series already.but they all in Japanese.

the Pin map is just like Fractal said. you could show this using digital meter.but please use the RS232 to TTL coverter which I used a electrical dictionary’s cable,
Txd,Rxd,Gnd,9600-N-1.I would like to get a flasher and any version firmware.

my E-mail: film_montreal@hotmail.com

Thanks in advance!

for those who can’t get the device booting, you might want to try these options: (use your own IP address)
boot device : cpm0
processor number : 0
host name : SOLPHONE
file name : flash
inet on ethernet (e) : 192.168.0.122:0xffffff00
inet on backplane (b):
host inet (h) :
gateway inet (g) :
user (u) :
ftp password (pw) (blank = use rsh):
flags (f) : 0x8
target name (tn) : EWC192168000122
startup script (s) :
other (o)

I am looking for Default Firmware of Teliann IP Phone

VxWorks default Firmware for H.323 & SIP