- This topic has 1 reply, 1 voice, and was last updated 21 years, 1 month ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
I am unable to use PBX ports on the A400. I have activated those ports through the web interface.
Advise me.
Quintum itself advices against using the web browser.
It should work ,however. If you send me a copy and paste of PBXTNTG
from the CLI command, I will go over it and tell you if I see something wrong.go to the CLI, either via telnet or direct conection to the RS@232 port.
Type config
at the config# prompt, type “print”
capture the file, erase or mask out the I.P. addresses or any other confidential info and send it to me
I will take a look and tell you if I see the mistake.
Cheers!!!!!!
Viewing 2 posts - 1 through 2 (of 2 total)
- The forum ‘Voice over IP’ is closed to new topics and replies.
