VoIP bandwidth calculator...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Modem over IP (with ATA-186)

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 28th November 2003 at 18:40 #25756
    Claire
    Guest

    I would like to connect credit card reader which incorporates a slow modem (V.21) to ATA-186 (or similar)RJ-11 port.

    At the other end of my LAN, a VoIP gateway would be connected to PSTN.

    Thanks in advance for comments about feasability or problems.

    cLAIRE

    29th November 2003 at 05:19 #25757
    Adrian
    Guest

    Claire, modems will not work in a VoIP environment due to the lack of synchronisation of information delivery and UDP having no error control.

    29th November 2003 at 22:32 #25758
    Gary
    Guest

    Claire,

    I have had successful modem connections of 9600 and 14400 through the QTelNet line of FXS and FXO’s. We were able to go out of an external modem on a computer, into an FXS port, dial the “alias” of the other unit ( in your case it would be set up in a hotline scenario, i.e. as soon as the unit goes off-hook, the call is sent directly to the FXO ) and connect at the mentioned speeds with very good success. Check out:
    http://www.qtelnet.com or contact me and I will be able to assist you in finding out more about the appplication at:
    gary@loookieloo.net

    Gary.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.