Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Number digit deletion in Quintum

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 10th November 2003 at 14:19 #25654
    Kashif
    Guest

    Hi,

    I need some info on how to delete the first 4 digits of the called number in Quintum.
    The calls are coming on a PSTN trunk group and going out to the VoIP. The final destination is on the VoIP network. I need to reduce the called number digits to 7 after a match is made in the border elements table. The reason is that the gateway on the other end can only take a maximum of 8 digits in the matching pattern.
    Any help is greatly appreciated.

    Thanks

    12th November 2003 at 02:48 #25655
    Sonny
    Guest

    To what I understand, the originating gateway converts the call to an international calling standard, then the receiving gateway will remove numbers and replace as needed. That feature is called LAM pattern in Quintum.

    Good Luck.

    12th November 2003 at 08:14 #25656
    trial_error
    Guest

    on receiving gateway, under config# type “iptg”, you can add and strip digit you want.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.