Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Call Disconnection

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 13th August 2003 at 10:37 #24962
    Herc
    Guest

    hi all,
    I have a P32mxi Channel bank connected to a PBX(analog loop start lines). I have the VAD software enabled too..
    but i am not getting call disconnection..

    any ideas..?

    Thanx,
    Herc

    13th August 2003 at 15:42 #24963
    Vurcos
    Guest

    What is the Call flow? Who disconnects from the call P32 or PBX?

    14th August 2003 at 11:13 #24964
    Mehmet Erdem
    Guest

    Hi,

    We are using an Quintum A800 and selling calling cards. The A800 is connected with a hosted softswitch. Softswitch sometimes does not recognize the disconnect of calls. So we see wrong billings. Can anyone help us or give us advice?

    Thanks,

    14th August 2003 at 17:14 #24965
    Vurcos
    Guest

    What is the Signaling Protocol? SIP or H.323? Usually SoftSwitches are SIP, but I just want to clarify.

    What is the function of the softswitch for your application? Registration, Redirect, or Proxy.

    What I would do is use a packet sniffer on the call and see where is issue lies.

    Please let me know if you nedd help with this.

    thx,

    Jason

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.