Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Configuring Quintum

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • 23rd April 2003 at 10:52 #24229
    Ahmed
    Guest

    I am looking for assistance in configuring a Quintum A800 – if someone can help kindly contact.

    25th April 2003 at 03:05 #24230
    Tony
    Guest

    What do you need to configure. Tell me more about what you want to accomplish with that A800.

    29th April 2003 at 13:16 #24231
    Teodor Georgiev
    Guest

    When I started with Quintum I was quite happy to meet a guy on this forum named Vassil. It seems that he is quite knowledgeable in running Quintum in any environment. Try to agree with him. Probably he is still around.

    12th May 2003 at 04:57 #24232
    lucke@sky
    Guest

    hi maybe i could help you too.
    let me know what do you need…?
    saludos.

    12th May 2003 at 06:27 #24233
    Path
    Guest

    Hi…what is the procedure for recording a customer IVR on Quintum Tenor A800?

    12th May 2003 at 06:28 #24234
    Path
    Guest

    Can anyone help me with retrieving session start time on Quintum Tenor A800?

    12th May 2003 at 10:06 #24235
    Ahmed
    Guest

    First of all, thanks for your input. I need to setup my A800 for incoming call from foreign IP.
    So far , I have setup codec, LAMpattern , Primary border element (as there are 2 )..
    Anything else??

    12th May 2003 at 13:03 #24236
    noname
    Guest

    Do you have the whole manual for the Quintum ????It is a document about 300 pages, where it details every command available.
    One of the best tools to troubleshoot.
    Anyone interested ,send your e-mail to mike3799@yahoo.com.

    You e-mail needs to be good for about 3.5 mb. Those with yahoo, clean up a little the old messages.

    The cost: after receiving the document just say “thanks”.

    Noname.

    24th February 2004 at 14:37 #24237
    Zulfikar
    Guest

    hi all, any body know setup quintum A800, work by netmetting. if possible send information

    Thanks everybody

    25th February 2004 at 13:28 #24238
    KS
    Guest

    how do i tell quintum A800
    when the user enter the destination number

    if the number stats with 001 use the gateway no 1

    if the number starts with 0044 use the gateway no2

    if the number starts with 0017 use the pstn port and dial the number.

    I don’t mind even using a external software and doing this, please let me know how to do this

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.