[Clerk]

2 EDS
the configuration is relatively simple.
send me an e-mail to gh@sicres.md and i’ll help you with configuration.

[kashif]

EDS,

it is not very difficult to config. i have some experience in it. if you want i can help you set it up. email: kashifned@yahoo.com

[jc_hui]

ED,

First you must understand the gateway command, then you draw out the requirement of you need. With the table requirement you draw should be no problem.

I was implemented to my multinational company. Or you give me the specification and requirement I help you to confgure it.

Have anyone facing ports blocking issue. Especially the RADIUS, H323 and TFTP for voice prompt.

[Nasir]

EDS

go and check this address http://www.techland.co.uk/shared/techdocs/cli419.pdf you will find all you need.

send me and email to Abmoalin@Yahoo.com we will share our knowlodgy

hopefully thing will ok for you

[john]

Hi,
I m planning to buy quintom softswitch can any body suggest which is best for us and where can i get the brocture for quintom softswitch

John

[Roup]

Vasil
Hello
Can you tell me how I make quintum 800 redirected IP’s(Behined a Proxy) availeble on the net

[Hillol]

Hi, All;

I have a Quintum D-2400 and a T1 GSM Channel Bank. Now, i want to do call origination for pre-paid calling card for this i have IVR, Radius, billing software installed in a server. can anybody sent the Quintum D-2400 configuration for this perpose.

[Khurram]

Hi i am using Qintum A800 and AS 400 i am facing Echo problem. Is there someone here to help me to figure it out that which configuration we do to solve that echo.

[www.sysmaster.net]

Make sure that you have set your echo cancellation parameters on your 5400:
For example:
voice-port 1/1:D
input gain 2
echo-cancel coverage 32 (This is the ECHO CANCEL parameter I was talking about)
cptone GB
timeouts initial 120
timeouts interdigit 2
timeouts call-disconnect infinity
timeouts ringing 60
description TRUNK#1
bearer-cap Speech

[Qguy]

Need help my quintum is on a booting loop. Keeps reloading at this point

Scanning for zip file…………….
Found file at 0x2830020

am unable to key in any commands at console

[Qguy]

2 Noname

I cannot access my A800 neither through Console or telnet, after i changed the IP, Through consol i get a resetting loop

Scanning for zip file…………….
Found file at 0x2830020

I cannot get to Modify(M) or continue (C),

[Khurram]

I cannot access my A800 neither through Console or telnet, after i changed the IP, Through consol i get a resetting loop

Scanning for zip file…………….
Found file at 0x2830020

I cannot get to Modify(M) or continue (C),

[Qguy]

Please help me to get into my A800, i cannot get in via telnet or console.

[bodiii]

How can i configure the quintom to call from one pbx port to enather on same quintum?

[bodiii]

How can i configure the quintom to call from one pbx port to enather on same quintum?

[Author]

Posts