[curZon]

anyone can help me , how to configur a 8 port Quintum GW and 24 port Quintum Gw.

curzon_computer@hotmail.com

tahnking u best
curZon

[jeez]

Why don’t you just call Quintum Support?

[muhit]

hi to all
may have a quintum tenor
AX seris.i don’t know how
to block unknown ip
call.please any one hellp me.

my id abdulmuhit@hotmail.com

[MBAKOP MAGELLAN]

i want help for flexphone display configuration
please help me to use console flexphone

[venkat]

how to reset my tenro ax 24 port to factory default ????

plx help me

[MikeM]

venkat,

I found this information easily by searching the command reference manual that is online on Quintum’s web site under the customer service area at; http://www.quintum.com/support/products/2G/tenor_2G/sysdoc/webhelp/quintum_tenor_guide.htm

the command is;
config-VOIPNetwork-1* setfactory

You may want to try searching for this in the future as it will give you your answer quicker.

[DAKAYI]

WHAT CAN BE DONE

DID YOU KNOW THAT SOME IP ADRESS
DOESN’T ALLOW TO SETUP THE QUINTUM TENOR ASM 400 USING TELNET.

WHAT CAN BE DONE TO CORRECT IT

REGARDS

[dalla]

hi to all:

can i get answer any body can help me..

i have call shop and i want make system for calling and i donot want used voip in this time i geted good program at this link:
http://voip-forum.tmcnet.com/voip-forum/forum/forum_posts.asp?TID=5426
http://www.billinglabs.com

requirment of program

Quintum:
1.Quintum from the AS/AX Series
2.Firmware version P102-11-00 and above

how the price of quintum and how i buy it i am in africa and is it mean i will use it for voice ip only..

thanks to all

mail:elecchild@hotmail.com

[mr goni]

hi

I want to know to u how can i learn queentum setup?

[MikeM]

Mr. Goni,

If you would like assistance in setting up your Quintum, you can contact me at mike_voip@hotmail.com to discuss your application and my rates for support.

Mike

[Ameen]

Hi Guys ,
May be i can help out in configuring ,trouble shooting & installing QUINTUM gateways.
Everybody feel free to contact me for any kind of support for Quintum gateways….
I have 7 years of experience in configuring QUINTUM gateways.
You can contact me : microunited@hotmail.com

[Mike]

Ameen,

I am wondering. You say you have 7 years experience with Quintum, so that would put it at 1998. That is strange, since that is the year that Quintum started as a business. They did not come out with a product till Oct of 1999, and that was only to a select few customers. I don’t recall any being sent to India till sometime later in 2000 or 2001.

If memory serves me correct, MicroUnited did not come on as a Quintum reseller till some time in 2002.

Please say hello to Satish Kumar & Siva for me. Tell him it is Mike M.

I think they may remember me as I worked with them quite a bit some time ago.

[Ameen]

Hi Mike ,
Nice to meet you .I know you worked with sathis, siva some time before.
I have been in line with Voip from 1998 and may be i am new with you.
For your information we are not based in India ,but we are based on SAARC and Asia pacific.
My experience with VOIP is seven years.
You might know that We have been providing support for Quintum call shop,calling card,corporate set up all over the globe for FREE.
I started with Cisco systems and then have experience in say Quintum ,welltech ,audiocodes ,Level one products.
Neverthless all the VOIP appliance work with same protocols and principles so no need to have experience in particular product for many years.

[chris]

The problem is, when we set the answer delay timeout for ringing and for voice promt, there is also delay of seconds in billing. For example we set an answer delay of 6o seconds. If the called party’s phone rings and he answer that after 1 ring then the billing delayed. The conversation starts but the billing not yet start. I need your help.Can we configure the maximum rings and block the voice prompt?

[renganathan]

sir,

i have quintum AX 400 series.
how to find the ip address .

by
renga
network engineer

[Author]

Posts