[Simo]

As I answered in your other question in an equally un-related topic thread, you can easily find this information on Quintum’s web site by reviewing the product specification sheets.

In short the ASM has 4 fxo and 4 fxs ports. The AXM starts with 8 FXO and 8 FXS ports.

[Eno O]

Please I need to access my Quintum but I don’t know the original password before accessing it. Please if you have any idea, kindly email it to me. enochok@gmail.com

Thank you very much

[Max]

What equipment is needed to to provide calling cards service. Can this be done with a intergrated Cisco or Quintum unit.

[Teodor Georgiev]

Guys, do not buy the FXO-equipped second generation Quintums.
They are still unreliable.
Their disconnect supervision algorithm is crappy.
You will fall into a trouble.

[Zaman]

Hello guys,

I need to learn Quintum A800 and AX800 configaration,Can any one help me? I cometment I will do something for him.

[ngozi braide]

we have used the configuration you sent, using our own ip addresses, but what of the call signal IP address,
what IP address SHOULD IT BE, YOURS
OR OURS.

[DJEUYA]

please i need documentation to install and setup my quintum A400

[MikeM]

DJEUYA,

did you try looking at Quintums web site under the support area?

[Wilson Boyrie]

On http://WWW.quintum.com, on the bottom of the page, click on customer service, you will have all the manuals and information about the Quintum.

[Zaman]

I think i can help you with your problem… i will expalin to you on the configurations

[Jack]

“Quintum good all you people here bad” don’t give specific information. If don’t want to give information in details don’t write here.Thank you.

[bertcamroy]

Hello Zaman i can help you explain configurations… email me at gilbertrumku@yahoo.com maybe i can help you..

what is your problem Jack?….

[Rusty]

The latest Cisco IP-to-IP Gateway does SIP H323 and transcoding. It works as a SIP & H323 proxy softswitch and runs on several standard Cisco routers 1850, 2651xm, 3845, and others. Heck you probably have one of these routers all ready in stock. If you have any questions email me monitrader@att.net

[riyfat]

I have a Quintum Tenor A800 +8 pstn line.Is it possible to run
multiple dial plan on a single Ip?
like :
I want 2 run 4 local call & 4 pstn call on a single Ip. Is there any way to do it ?
Plz send me some basic

_callblocking commands
_call routing commands
_Ip config command
_pstn port test command

It will help me a lot if any one send me thease infos at_
riyfat@yahoo.com
riyfat@hotmail.com

Thanking you.

[Surendra]

can someone help me to configure quintum A800 with cisco gateway?

[Author]

Posts