Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Quintum 800

Viewing 15 posts - 16 through 30 (of 205 total)
1 2 3 … 12 13 14
  • Author
    Posts
  • 7th July 2003 at 14:09 #22970
    Begra8fl
    Guest

    Hi Jeff and everyone
    I’m new to VoIP. Please can you share you thought and experience with me on the configuring a Tenor A800 on a private LAN over cable modem. I have a Linsys Router on the network. Thanks

    15th July 2003 at 04:16 #22971
    Jessie
    Guest

    Hi guy. Im am currently configuring a quintum d3200. The setup is for outgoing, can anybody help me how am going to configure it? Please give me a step by step configuration. Thank you.

    19th July 2003 at 11:14 #22972
    Andrey
    Guest

    I must to connect two quintums a800 with wireless equipment between them (on pbx side)!
    I need to do it fast in my office, and connect two telephones on pstn side of the quintum so they can talk between them , without any other equipment.
    Please help me fast !!!!!
    Thank you !!!!

    21st July 2003 at 15:23 #22973
    Matt
    Guest

    I have experience configuring Quintum boxes. I can help you out. You can reach me at my email address.

    21st July 2003 at 15:26 #22974
    don
    Guest

    jeff describe how you made the connection of A400/800 using private IP (192.168.xxx.xxx) Im trying to make the same on A800 but incomming calls are being lost. Outgoing no problem.

    24th July 2003 at 10:17 #22975
    kolawole
    Guest

    Please,I hope someone could help me out of this.I have a quintum A400 working fine but there is a change in my network connection which has affected the service.I have try to change the Ip address it was so difficult to respond despite i have the manual with me.
    Please, help

    25th July 2003 at 14:05 #22976
    Matt
    Guest

    I’ve got Quintum Experience. You can email me if you need you question answered. Mattg@telcomproducts.com

    26th July 2003 at 19:12 #22977
    Kolawole
    Guest

    I got it working after several attempt.

    27th July 2003 at 05:59 #22978
    Andrey
    Guest

    Matt hi!
    Did you got my email?

    30th July 2003 at 21:29 #22979
    Shanker
    Guest

    Hi ,
    Can anyone send me the commands to configure A800 Tenor as the manual is not helpful.

    1st August 2003 at 22:18 #22980
    casraou
    Guest

    hi dears
    pls i need helpCan anyone send me the commands to configure A800 Tenor as the manual is not helpful.

    1st August 2003 at 22:38 #22981
    kasraou
    Guest

    Can anyone send me the commands to configure A800 Tenor as the manual is not helpful.
    and how connect between tenor a800 and sesco 1v50 and datum 4900 l

    regards

    5th August 2003 at 12:54 #22982
    Andrey
    Guest

    Hy
    Anybody know why qa800 drops the call ? four qa800 goes to qd800,
    1 to 8 seccsesuful calls.
    I cant figure it .

    6th August 2003 at 02:22 #22983
    Jessie
    Guest

    Hi Matt. I beleive you have an experience in Quintum configuration,I am currently configuring a quintum d3200. The setup is for outgoing, can anybody help me how am going to configure it? Please give me a step by step configuration. Thank you.

    11th September 2003 at 16:06 #22984
    Serguey
    Guest

    Im configured everything on the Quintun Tenor A200, and after rebooting it couldn’t start up.
    How can i rest it to factory default?
    There is start up message:

    Internet Telephony Gateway ( Include FirstAid code)
    Hardware Version : 1.02
    Boot Code Version : 1.03
    LAN Port MAC Address : 00.30.e1.50.0b.6e
    WAN Port MAC Address : 00.30.e1.50.0b.6f

    RTL8019 NIC command Register write test — OK
    RTL8019 MAC Loopback Test — OK
    NW1034 register Read/Write test — OK
    AudioCode_0 HPI register test — OK
    AudioCode_0 Memory Test — OK
    AudioCode_1 HPI register test — OK
    AudioCode_1 Memory Test — OK

    AudioCodes Kernel code software version
    Name: Ac48302ck-S Ver : 1.26 Date:1/24/2001

    AudioCodes Program code software version
    Name: Ac48302ce3-S Ver : 1.41 Date:5/14/2002
    Press ENTER to get in POST console within 3 seconds.
    …………………………………………………………
    Normal code checksum ok

    Starting system

    Кre
    AudioCodes
    ** Trap : Data Abort Handler
    Data Abort Instruction Address: 0x10f9ff4
    Data Abort Task: H323App
    reash Write OK!!!
    AudioCodes
    ** Trap : Data Abort Handler
    Data Abort Instruction Address: 0x10f9ff4
    Data Abort Task: H323App
    reash Write OK!!!
    AudioCodes
    ** Trap : Data Abort Handler
    Data Abort Instruction Address: 0x10f9ff4
    Data Abort Task: H323App
    reash Write OK!!!
    AudioCodes
    ** Trap : Data Abort Handler
    Data Abort Instruction Address: 0x10f9ff4
    Data Abort Task: H323App
    reash Write OK!!!
    AudioCodes
    ** Trap : Data Abort Handler
    Data Abort Instruction Address: 0x10f9ff4
    Data Abort Task: H323App

  • Author
    Posts
Viewing 15 posts - 16 through 30 (of 205 total)
1 2 3 … 12 13 14
  • The forum ‘Voice over IP’ is closed to new topics and replies.