VoIP bandwidth calculator...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

ISDN call reject

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 30th September 2002 at 11:03 #22154
    mata
    Guest

    I trying to make call from Cisco AS5300 to remote 3620 with E1 HDV ISDN PRI line. Originat & Remote cisco use IOS 12.2.2XB6 . But my call is hitting the remote gateway and giving me following debug message.

    ISDN Se0/0:15: TX – SETUP pd = 8 callref = 0x0009
    04:18:33: Sending Complete
    04:18:33: Bearer Capability i = 0x9090A3
    04:18:33: Channel ID i = 0xA98381
    04:18:33: Progress Ind i = 0x8183 – Origination address is non-ISDN
    04:18:33: Calling Party Number i = ‘A’, 0x83, ‘62865109’, Plan:ISDN, Typ
    e:Subscriber(local)
    04:18:33: Called Party Number i = 0xA1, ‘2272484’, Plan:ISDN, Type:Natio
    nal
    04:18:33: ISDN Se0/0:15: RX RELEASE pd = 8 callref = 0x0009
    04:18:35: ISDN Se0/0:15: RX

    30th September 2002 at 11:20 #22155
    cici
    Guest

    check the progress indicator settings in the cisco. the trace says the destination is non-ISDN. Does any other part of your trace reveal a disconnection CAUSE CODE? This ETSI code will tel you why the disconnect took place.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Voice over IP’ is closed to new topics and replies.