Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

GR303 and V5.2 Interface to MSC

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 27th April 2004 at 09:41 #37934
    Hari
    Guest

    Hello,

    By any chance GSM ( using MSC) can interact to PSTN using GR303 or V5.2. I know it uses SS7, are there any MSC which support GR303 or V5.2 to interface to PSTN?.

    I remember Reliance CDMA using V5.2 to connect to PSTN. Can any one conform the same.

    -Thanks
    Hari

    27th April 2004 at 14:17 #37935
    Senthil
    Guest

    What is this V5.2 ?

    Kind of Signaling ?

    Rgds

    28th April 2004 at 11:07 #37936
    Hari
    Guest

    Senthil,
    V5.2 is a protocol used on “Access network”, it is mainly used between DLC and Class-5 (SSP).
    -Thanks
    Hari

    28th April 2004 at 19:36 #37937
    Dmitry
    Guest

    actually, you can find details of V5 in ITU rec-s. v5 allows to conn. pstn and isdn subscribers(pri and bri) to local exch. through access netw – accord. to spec. v5 equipm. is called access network. also you can rec.-transmit low band data and route this one.

    29th April 2004 at 04:54 #37938
    Senthil
    Guest

    This is only used in PSTN ? and is this is the normal Signalling used beween PSTN DTMF Phone and Local Exchange ?

    Rgds

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.