Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

SS7 Signalling Dimensioning

Viewing 15 posts - 61 through 75 (of 77 total)
1 2 3 4 5 6
  • Author
    Posts
  • 29th September 2009 at 22:13 #37100
    Jose
    Guest

    Hello,

    can you help me to confirm which is the ITU-T recommendation mentionated by Tariq?

    BR//José.

    26th February 2010 at 17:46 #37101
    jagdish
    Guest

    hi , I have a question , that is – How many maximum number of HSL (high speed links ) can be created between two Nodes . and why …

    25th March 2010 at 19:00 #37102
    B Dasu
    Guest

    for 1 Signaling link(64kbps)= earlang is 0.189 then what will be the earlang for HSL link.(2mbps)

    1st April 2010 at 15:16 #37103
    diggy
    Guest

    can some help me on the following:

    1. if a mobile node ( e. HLR) is equipped with say 4 ASPs ( application server process)how many associations can be created towards other NEs such as SMSC,IN,MSC server, etc..

    19th July 2010 at 19:18 #37104
    pradeep
    Guest

    in cas ts16 carries only signalling data of 2 ts but signalling of 30 ts are done in a multiframe of 16 frames

    3rd November 2010 at 07:29 #37105
    Dinesh
    Guest

    Can anyone tell me the signalling link capacity of 1 HSL, in terms of Erlang or number of SMS

    3rd April 2011 at 15:11 #37106
    NIHIT SRIVASTAVA
    Guest

    What is the capacity in erlangs of one HSL as LSL have 1 erlang capacity wrt 1 link?

    19th July 2011 at 07:28 #37107
    Deebendu Kumar
    Guest

    Hi,

    I am looking for tool to calculate ss7 link per erlang.

    17th August 2011 at 10:03 #37108
    shunmugom
    Guest

    Good evening to all, can you tell me how to restrict voice channels in SS7 Signalling link

    18th August 2011 at 06:07 #37109
    Mick
    Guest

    to shunmugom

    if we consider ONLY the voice channels, without ANY other services, that a one SS7 link can serve up to 1 500 voice channels

    20th August 2011 at 06:18 #37110
    Dinesh
    Guest

    How can we improve the paging performence

    17th May 2012 at 08:42 #37111
    Jeet
    Guest

    pls clarify, to calculate SS7 signaling link load on a particular link..why Max of Tx or Rx Octets is taken instead of sum of Tx & Rx Octets?

    Formula sig link load: (Max of Tx or Rx Octets)+ 7*MSU / Tin * 60 * 8000. You use the attached tool (c7tm.exe) for this purpose.

    17th May 2012 at 10:41 #37112
    Bijoy
    Guest

    Hi Jeet.
    This is due to the counter design.The counters Octets RX/TX are accumulation counters which take sum of all RX/TX octets for a given duration.

    In case,at any time if any of your SL reaches(TX/RX) > 0.2 Erl(or whatever the threshold set),an SL congestion/overload alarm is set.

    Br\\
    Bijoy

    19th March 2013 at 07:06 #37113
    Sanket
    Guest

    I have 23 MSU for a call and the max load is 8 calls per second. Average MSU size is 120 bytes.
    The max loading on one link should be 40%.

    Based on the above data, can anyone tell me how many LSL (64kbps) links will be required to cater the above traffic. Thanks.

    25th April 2014 at 12:42 #37114
    Ganisa
    Guest

    Can any one tell me what is the maximum number of E1s that can be connected to one signaling link in SS7 network. thank you

  • Author
    Posts
Viewing 15 posts - 61 through 75 (of 77 total)
1 2 3 4 5 6
  • The forum ‘Telecom Design’ is closed to new topics and replies.