Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

GPRSPRIO

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 10th September 2011 at 09:46 #67167
    saleh
    Guest

    hi all,

    please any one can explain what mean by GPRSPRIO=15

    and what is the suggested value?

    B.R
    Saleh

    15th September 2011 at 06:55 #67168
    Jason
    Guest

    GPRSPRIO parameter controls whether preemptable ODPDCHs will be treated as idle or busy.
    This range is from 0-15.

    At a 15 I believe that it will treat your GPRS TS as busy, thus giving you less voice capacity.

    If you move it to a 0 or a 1 you will allow gprs to be prempted for Voice. I believe this is used for HR packing.

    18th September 2011 at 14:18 #67169
    Xlex
    Guest

    This parameter controls whether pre-emptable ODPDCHs will be treated as idle or busy for dynamic HR allocation and TCH packing functions (i.e. HR packing and DYMA), Cell Load Sharing, Subcell Load Distribution, Hierarchical Cell Structure (HCS) and GSM-UMTS Cell Reselection and Handover.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.