Erlang software tools...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

APG Fault

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 5th May 2011 at 08:23 #66295
    OTMOT
    Guest

    DATA OUTPUT, AP COMMON DESTINATION HANDLING, DESTINATION FAULT

    Hi, all

    The above fault occurs in the APG.
    cdhver destination gives OK for both STATUS and NOT OK for NOTIFICATION.

    Cause is CONNECTION LOST TO REMOTE SYSTEM

    Anyone knows how to clear the alarm

    5th May 2011 at 08:33 #66296
    Joar
    Guest

    Hi,

    If there is NOT OK for notification then problem is in the remote host on which you have to check.

    Regards,
    Joar

    5th May 2011 at 13:43 #66297
    OTMOT
    Guest

    Thanks Joar

    Yea NOTIFICATION is NOT OK.
    I used cdhls to see the destination IP address and if I ping it shows 100% reception of packets. Is this the right way of testing remote connection to host?

    Thanks

    23rd January 2017 at 23:04 #66298
    AMROUNI abdelaziz
    Guest

    DATA OUTPUT, AP COMMON DESTINATION HANDLING, DESTINATION FAULT

    Cause is CONNECTION LOST TO REMOTE SYSTEM

    Anyone knows how to clear the alarm
    N

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.