Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

huawei intra cell

  • This topic has 3 replies, 1 voice, and was last updated 14 years ago by Bijoy.
Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 18th October 2010 at 12:48 #64719
    suresh
    Guest

    Hi bijoy,pix,

    here we have handover control switch 1 .So i want to know which parameter wil enable intra cell handover and at which quality threshold parameter intra cell handover will happen.

    and one more thing we hace f2h is 25 db and h2f is 10 db so how this will work ?

    21st October 2010 at 16:26 #64720
    suresh
    Guest

    hi bijoy,

    buddy can u help plz?

    21st October 2010 at 18:25 #64721
    Pravin Nagalgaonkar
    Guest

    What is RAU Update?
    What is BA List?

    28th October 2010 at 07:06 #64722
    Bijoy
    Guest

    Hi Suresh.
    I was on vacation,so couldn’t reply earlier.

    HO control switch determines whether HO algorithm 1 or 2 is used.

    The parameter “Intracell HO Allowed
    ” in Basic HO parameters controls the intracell HO.

    An intracell HO takes place when either UL signal quality or the DL signal quality exceeds the BQ handover threshold,then If there is no neighbor cell, Intracell HO Allowed is set to Yes, and the serving cell is not
    in intra-cell handover penalty state, then intracell HO occurs. A channel with different frequency band, different frequencies set, different TRX, or different timeslot
    is preferred (priority: different frequency band > different frequencies set > different TRX
    > different timeslot).

    This is OK as as for the same Bit rate AMR FR is more robust than AMR HR,so,for higher C/I we can go for AMR HR & as the C/I decreases AMR FR is preferred.

    Br\\
    Bijoy

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.