Erlang software tools...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

HOW TO: Reduce CP Load for MSC

  • This topic has 2 replies, 1 voice, and was last updated 14 years ago by BONY.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • 13th October 2010 at 04:20 #64652
    BONY
    Guest

    Hi all,

    Do you know how to reduce CP load for the MSC in case it reaches a high value? I have some solution:

    – turn off Authentication function
    – turn off IMEI Checking
    – turn off TMSI Reallocation
    – increase Implicit Detach Timer
    – turn off some Statistic function
    – block some traffic/signalling route
    – clear subscriber data, that powered-off for more than 24h, in VLR

    If you have other idea/opinion, please comment. Thanks a lot.
    BONY

    13th October 2010 at 04:30 #64653
    pix
    Guest

    hi,

    i don’t have other ideas, but just one thing :
    – increase Implicit Detach Timer
    –> it should be “decrease”, so that MS are detached earlier and they don’t overload the VLR database, isn’t it ?
    When you change Detach Timer & Purge Timer, don’t forget to tune the T3212 accordingly (bss parameter)

    regards
    pix

    20th October 2010 at 03:40 #64654
    BONY
    Guest

    Hi Pix,

    If you decrease that timer, MSC more frequently scan the database so its CP load will be higher. That’s why it should be increase that timer.

    Any idea else?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.