Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Rx path imbalance alarm

Viewing 15 posts - 1 through 15 (of 18 total)
1 2
  • Author
    Posts
  • 14th June 2010 at 13:25 #63141
    jude
    Guest

    Please help me how can I resolve definitely Rx path imbalance in RBS 2106.

    19th April 2012 at 22:19 #63142
    YASSINE
    Guest

    wouled you please show me how can I resolve definitely the alarm Rx path imbalance in RBS 2206.

    29th April 2012 at 10:24 #63143
    jamil
    Guest

    hi yassine
    try to chick the VSWR and the IDB

    3rd September 2013 at 19:51 #63144
    dickson richy
    Guest

    how to solve rx path imbalance

    4th September 2013 at 17:57 #63145
    pix
    Guest

    hi,

    check your antenna system, there is one of the 2 feeders for that sector which is not transmitting signal to your BTS properly.

    So check, frombottom to top:

    0/ vswr on each cable
    1/ bts internal cabling tx and rx
    2/ jumpers from bts
    3/ feeders
    4/ couplers / diplexers/triplexers
    5/ tma
    6/ jumpers to antenna

    the idea is to find an inversion somewhere.

    you can also check sdcch/tch allocation success rate for each trx, see if some trx are poor. In such case, check other sectors too. if other TRX are poor too, then you can assume there is a cross jumpers issue.

    regards

    9th January 2014 at 17:17 #63146
    ngocvector
    Guest

    I think you should re-check the steps as bellow :
    -Jumper & feeder cable & connector
    -VSWR
    -involvement equipment
    * If everything is ok, you should supervise antenna to show parameter get simple and receive power level how much dB and associate with BSC to check some power control parameter. cause of it has some issue but BTS can not check.
    Have a success..!

    13th March 2015 at 22:33 #63147
    ishmael
    Guest

    Rx path imbalance in 6101 cabinet

    9th August 2016 at 17:03 #63148
    Elabor kash
    Guest

    how can I resolve a permanent RX path imbalance alarm,that the jumper,feeder cable,connector and surge are OK!

    4th October 2016 at 09:24 #63149
    Peter Mogwadi
    Guest

    Hi. Help me solve rf performance alarm on Axell repeaters and rx imbalance on RBS 2111.

    21st February 2017 at 17:50 #63150
    AKKAL MD
    Guest

    What means RX Path Imbalance

    22nd February 2017 at 15:54 #63151
    jamil
    Guest

    hi AKKAL MD rx bath imbalance mean that you have wrong installation in feeder and antenna make rx bath imbalance also make KPI and TCH and DCCR
    so quality of site will reduced or calling drop .

    22nd February 2017 at 15:56 #63152
    jamil
    Guest

    hi AKKAL MD rx bath imbalance mean that you have wrong installation in feeder and antenna make rx bath imbalance also make KPI and TCH and DCCR
    so quality of site will reduced or calling drop .

    23rd February 2017 at 17:56 #63153
    AKKAL MD
    Guest

    thinks friends.
    in this cas TRXC-0:
    RX Path Imbalance:
    RX imb. superv. values:
    Supervision window configured time: 1440 min
    Supervision window elapsed time: 1440 min
    Average delta signal strength A-B: 0.0dB
    Number of samples A-B: 0
    Number of samples A-B: 0==== no trafic

    24th February 2017 at 19:00 #63154
    jamil
    Guest

    hi akkal i have document will help u
    elbanna.jamil@gmail.com

    20th July 2017 at 10:12 #63155
    KAZEEM AZEEZ
    Guest

    I want a permanent resolution to my rx path imbalance alarm on my RBS 2206.
    Antenna, feeder cable and jumper cables have been replaced but the alarm still came back.

    Can anyone help here? Pls

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 18 total)
1 2
  • The forum ‘Telecom Design’ is closed to new topics and replies.