Erlang software tools...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

High SDCCH Drop rate

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • 9th June 2010 at 11:18 #63094
    sivan
    Guest

    I am working with NOKIA system,One of my cell having high SDCCH drop rate,there is no alarms in this cell,No frequency clash in this cell.TA also good(serving 99% with in 500mt)how can i find the reason and what is the solution for this issue

    9th June 2010 at 16:15 #63095
    Ali
    Guest

    Hi,
    aren’t you facing any interference problem on your cell?

    10th June 2010 at 06:28 #63096
    pix
    Guest

    sivan,

    i would suspect a faulty TRX, or interference.
    try allocating the SDCCH on another TRX.

    cheers
    pix

    10th June 2010 at 21:48 #63097
    Mak
    Guest

    try allocating the SDCCH on another TRX.

    But make sure on that TRx does not has path loss or path Imbalance.

    Otherwise it will increase your SD Drop.

    11th June 2010 at 12:54 #63098
    KJB
    Guest

    Hi Sivan,

    Suspected DL/UL TRX Quality issue.

    You can Check 196 report .

    Thx
    KJ

    12th June 2010 at 10:37 #63099
    SAD
    Guest

    What can be possible reasons that increase the SDCCH Drop.
    We are using Ericsson equipements. The SD drop reasons due to Others is the most elevate rate.

    21st July 2010 at 07:15 #63100
    Jude
    Guest

    Check all neiboring cells power and try to balance the power for all neiboring cells and their EIRP.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.