Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

VSWR

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • 4th June 2010 at 16:08 #63027
    jack
    Guest

    hi all.
    i have one important question.
    can we measure VSWR without the help of site master/spectrum analyzar??
    please some on expert in NOKIA BSC3i explain it for me step to step.

    7th June 2010 at 04:37 #63028
    Prabeen
    Guest

    Got Net monitor or Pocket?

    Then make a test call at the location. if ur RX qual increses abruptly it means the site may vswr issue. remember its not a confirmed one. its jus a prediction.

    7th June 2010 at 16:10 #63029
    jack
    Guest

    hi Prabeen.
    thanx for your reply but
    i want to check VSWR through my BSC.
    MY BSC IS NOKIA BSCi.

    8th June 2010 at 04:04 #63030
    Peace
    Guest

    You can monitor VSWR of cell through the VSWR’s threshold that defined in each cell
    There are 2 case alarm of VSWR: Alarm Normal, Urgent. If Normal, nothing happen. But Urgent, cell will be offaired.
    But this alarm depend on BTS system, according to me, this not true
    Measure by Site master is the best way to define VSWR
    You can ask ur vendor for this parameter in ur system, due to different interface in each BSS system. Note: should put 1.2 value in normal alarm ^^

    12th June 2010 at 07:38 #63031
    kalim
    Guest

    Hello Mr jack

    You only check can see the parameters that which sector VSWR is exceeded the standard value which is defined by Nokia of a particular BTS.
    You are not able to measure the exact value of vswr without site master on your Nokia BSC3i, just you run a command promt on the system.

    thanks

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.