RF Load(SFH) This topic has 1 reply, 1 voice, and was last updated 14 years, 4 months ago by pix. Viewing 2 posts - 1 through 2 (of 2 total) Author Posts 2nd June 2010 at 21:59 #62984 SAMGuest Hi Assume that I have 2 MAIO group.G-1 0-33 & G-2 0-32 for CH725 to CH791 Configuration S777 Example-1 Cell A: HSN 1 MAIO=G-1(0,2,4,6,8,10) Cell B: HSN 1 MAIO=G-1(12,14,16,18,20,22) Cell C: HSN 1 MAIO=G-2(1)G-1(24,26,28,30,32) And Example-2 Cell A: HSN 1 MAIO=G-1(0,2,4,6,8,10) Cell B: HSN 1 MAIO=G-1(12,14,16,18,20,22) Cell C: HSN 2 MAIO=G-2(1)G-1(24,26,28,30,32) Question: 1. What will be the RF Load for Example-1&2 please? Thanks. 2nd June 2010 at 22:01 #62985 pixGuest hi, i don’t understand your 2 examples… G-1, G-2 ??? the MAIO is not used to compute the rf load. HSN1 = 34 frequencies 7 TRX over 34 frequencies = 7/34 = 20.5% limit is 12% to 16%, so that’s way over the limit, unless not all TRX are used at busy hour. cheers pix Author Posts Viewing 2 posts - 1 through 2 (of 2 total) The forum ‘Telecom Design’ is closed to new topics and replies.