- This topic has 47 replies, 1 voice, and was last updated 3 years, 1 month ago by Felipe.
-
AuthorPosts
-
13th May 2010 at 06:36 #62656kishoreGuest
Hi, Iam currently working on Ericsson Telecom products.
I just want to know that if there is any auto program that would give the A3 alarm details just by feeding RXMFP printouts in the BSC.This is applicable to Ericsson RBS 2964 / 2954 / 2204 / 2206 / 2202 / 2111 / 2308
Can anybody pls help me out in this to avoid the manual interpretation of fault codes.
17th May 2010 at 18:10 #62657mohanGuestsir plz give reply…
31st July 2010 at 11:46 #62658rahulGuestwhat is the use of fault dicoder
10th August 2010 at 10:24 #62659AlexGuestYou could make a script to translate the faut code when you execute the RXMFP
BR
AlexWhere a list:
RXOCFFC1A0 Reset, failed restart attempt
RXOCFFC1A1 Reset, power on
RXOCFFC1A10 Indoor temperatu out of safe range
RXOCFFC1A12 DC voltage out of range
RXOCFFC1A14 Local bus fault
RXOCFFC1A15 RBS database corrupted
RXOCFFC1A16 RU database corrupted
RXOCFFC1A17 HW and IDB inconsistent
RXOCFFC1A18 Internal configuration failed
RXOCFFC1A19 Indoor temperatur above safe range
RXOCFFC1A2 Reset, switch
RXOCFFC1A20 Indoor temperatur below safe range
RXOCFFC1A3 Reset, SW fault
RXOCFFC1A4 Reset, watchdog
RXOCFFC1A5 Reset, RAM fault
RXOCFFC1A6 Reset, internal function change
RXOCFFC1A7 X bus fault
RXOCFFC1A8 Timing unit VCO fault
RXOCFFC1A9 Timing bus fault
RXOCFFC1B4 L/R SWI (BTS in local mode)
RXOCFFC1B5 L/R TI (Local to remote while link lost)
RXOCFFC2A0 Reset, failed restart attempt
RXOCFFC2A1 Reset, power on
RXOCFFC2A10 DXU optional EEPROM checksum fault
RXOCFFC2A11 ALNA fault
RXOCFFC2A12 RX maxgain/mingain violated
RXOCFFC2A13 Timing unit VCO ageing
RXOCFFC2A14 CDU supervision/comunication lost
RXOCFFC2A15 VSWR/Output power supervision lost
RXOCFFC2A16 Indoor temperature out of normal conditional range
RXOCFFC2A17 Indoor humidity
RXOCFFC2A18 DC voltage out of range
RXOCFFC2A19 Power system in stand-alone mode
RXOCFFC2A2 Reset, switch
RXOCFFC2A20 External power fault
RXOCFFC2A21 Internal power capacity reduced
RXOCFFC2A22 Battery backup capacity reduced
RXOCFFC2A23 Climate capacity reduced
RXOCFFC2A24 Coolor capacity reduced
RXOCFFC2A25 Heater capacity reduced
RXOCFFC2A26 Climate sensor fault
RXOCFFC2A27 System voltage sensor fault
RXOCFFC2A28 A/D converter fault
RXOCFFC2A29 Varistor fault
RXOCFFC2A3 Reset, watchdog
RXOCFFC2A30 Local bus fault
RXOCFFC2A31 High-frequency software fault
RXOCFFC2A32 Non-volatile memory corrupted
RXOCFFC2A33 RX diversity lost
RXOCFFC2A34 Output voltage fault
RXOCFFC2A35 Optional synchronisation source
RXOCFFC2A36 RU database corrupted
RXOCFFC2A37 Circuit breaker tripped
RXOCFFC2A38 Default values used
RXOCFFC2A39 RX cable disconnected
RXOCFFC2A4 Reset, SW fault
RXOCFFC2A40 Reset, DXU link lost
RXOCFFC2A41 Lost communication to TRU
RXOCFFC2A42 Lost communication to ECU
RXOCFFC2A43 Internal configuration failed
RXOCFFC2A44 Indoor temperature above normal conditional range
RXOCFFC2A45 Indoor temperature below normal conditional range
RXOCFFC2A46 IDB parameter fault
RXOCFFC2A47 Auxiliary equipment fault
RXOCFFC2A5 Reset, RAM fault
RXOCFFC2A6 Reset, internal function change
RXOCFFC2A7 RXDA A/B amplifier current fault
RXOCFFC2A8 VSWR limits exceeded
RXOCFFC2A9 Power limits exceeded
RXOCFFC2B10 MAINS FAIL (External power source fail)
RXOCFFC2B11 ALNA/TMA Fault
RXOCFFC2B12 ALNA/TMA Degraded
RXOCFFC2B13 Auxiliary Equipment Fault
RXOCFFC2B7 DIP A (PCM link A lost)
RXOCFFC2B9 RBS door (RBS cabinet door open)
RXOCFRU0 DXU
RXOCFRU1 ECU
RXOCFRU10 ACCU
RXOCFRU11 Active cooler
RXOCFRU12 ALNA A
RXOCFRU13 ALNA B
RXOCFRU14 Battery
RXOCFRU15 Fan
RXOCFRU16 Heater
RXOCFRU17 Heat exchanger external fan
RXOCFRU18 Heat exchanger internal fan
RXOCFRU19 Humidity sensor
RXOCFRU2 Micro RBS
RXOCFRU21 Temperature sensor
RXOCFRU22 CDU HLOUT HLIN cable
RXOCFRU23 CDU RX in cable
RXOCFRU24 CU
RXOCFRU25 DU
RXOCFRU26 FU
RXOCFRU27 FU CU PFWD cable
RXOCFRU28 FU CU PREFL cable
RXOCFRU29 CAB HLIN cable
RXOCFRU30 CDU bus
RXOCFRU31 Environment
RXOCFRU32 Local bus
RXOCFRU33 Power communication loop
RXOCFRU34 RX antenna A
RXOCFRU35 RX antenna B
RXOCFRU36 Timing bus
RXOCFRU37 TX antenna A
RXOCFRU38 RX antenna B
RXOCFRU39 X bus
RXOCFRU40 Antenna
RXOCFRU5 CDU
RXOCFRU6 BFU
RXOCFRU7 PSU
RXOCFRU8 CDU_Cos
RXOCFRU9 BDM
RXOCONFC1B8 LAPD Q CG (LAPD Queue Congestion)
RXOCONFC2B8 LAPD Q CG (LAPD Queue Congestion)
RXORXFC1A0 RXDA Amplifier Current Fault
RXORXFC1A1 ALNA/TMA Fault
RXORXFC1A10 RX Indication Fault
RXORXFC1A11 CDU Output Voltage Fault
RXORXFC1A12 TMA CM Output Voltage Fault
RXORXFC1A3 RX EEPROM Checksum Fault
RXORXFC1A4 RX Config Table Checksum Fault
RXORXFC1A47 RX Auxiliary Equipment Fault
RXORXFC1A5 RX Synthesizer A/B Unlocked
RXORXFC1A6 RX Synthesizer C Unlocked
RXORXFC1A7 Astra Dixie Communication Fault
RXORXFC1A8 RX Internal Voltage Fault
RXORXFC1A9 RX Cable Disconnected
RXOTFFC1A0 Optional Synchronization Source
RXOTFFC1A1 DXU-out EEPROM Checksum Fault
RXOTFFC1B0 EXT SYNCH (No Usable Esternal Reference)
RXOTFFC1B1 PCM SYNCH (No Usable PCM-Reference)
RXOTFFC2B0 EXT SYNCH (No Usable Esternal Reference)
RXOTFFC2B1 PCM SYNCH (No Usable PCM-Reference)
RXOTRXFC1A0 Reset, failed restart attempt
RXOTRXFC1A1 Reset, power on
RXOTRXFC1A10 Tora Dannie communication fault
RXOTRXFC1A11 DSP CPU communication fault
RXOTRXFC1A12 Terrestrial traffic channel fault
RXOTRXFC1A13 RF loop test fault
RXOTRXFC1A14 RU database corrupted
RXOTRXFC1A15 X bus communication fault
RXOTRXFC1A16 Initiation fault
RXOTRXFC1A17 X-interface fault
RXOTRXFC1A18 DSP fault
RXOTRXFC1A19 Reset, DXU link lost
RXOTRXFC1A2 Reset, switch
RXOTRXFC1A20 HW and IDB inconsistent
RXOTRXFC1A21 Internal configuration failed
RXOTRXFC1A3 Reset, watchdog
RXOTRXFC1A4 Reset, SW fault
RXOTRXFC1A5 Reset, RAM fault
RXOTRXFC1A6 Reset, internal function change
RXOTRXFC1A8 Timing reception fault
RXOTRXFC1A9 Signal processing fault
RXOTRXFC2A0 RX cable disconnected
RXOTRXFC2A1 RX EEPROM checksum fault
RXOTRXFC2A10 TX internal voltage fault
RXOTRXFC2A11 TX high temperature
RXOTRXFC2A12 TX output power limits exceeded
RXOTRXFC2A13 TX saturation
RXOTRXFC2A14 Voltage supply fault
RXOTRXFC2A15 VSWR/output power supervision lost
RXOTRXFC2A16 Non-volatile memory corrupted
RXOTRXFC2A18 DSP fault
RXOTRXFC2A19 High frequency software fault
RXOTRXFC2A2 RX configuration table checksum fault
RXOTRXFC2A20 RX initiation fault
RXOTRXFC2A21 TX initiation fault
RXOTRXFC2A22 CDU bus communication fault
RXOTRXFC2A23 Default values used
RXOTRXFC2A25 TX maximum power restricted
RXOTRXFC2A3 RX synthesizer unlocked
RXOTRXFC2A4 RX internal voltage fault
RXOTRXFC2A5 Astra Dixie communication fault
RXOTRXFC2A6 Astra Tracy communication fault
RXOTRXFC2A7 TX EEPROM checksum fault
RXOTRXFC2A8 TX configuration table checksum fault
RXOTRXFC2A9 TX synthesizer unlocked
RXOTRXRU0 TRU
RXOTRXRU10 CDU to TRU PFWD cable
RXOTRXRU11 CDU to TRU PREFL cable
RXOTRXRU12 CDU to TRU RXA cable
RXOTRXRU13 CDU to TRU RXB cable
RXOTSFC1B3 TRA/PCU (Remote Transcoder/PCU Com. Lost)
RXOTXFC1A0 TX Offending
RXOTXFC1B0 CU/CDU Not Usable
RXOTXFC1B1 CDU/Combiner VSWR Limits Exceeded
RXOTXFC1B10 Astra Tracy Communication Fault
RXOTXFC1B11 TX Internal Voltage Fault
RXOTXFC1B12 TX High Temperature
RXOTXFC1B13 TX Outpu Power Limits Exceeded
RXOTXFC1B14 TX Saturation
RXOTXFC1B17 TX Indication Fault
RXOTXFC1B18 CU/CDU HW Fault
RXOTXFC1B19 CU/CDU SW Load/Start Fault
RXOTXFC1B2 CDU Output Power Limits Exceeded
RXOTXFC1B20 CU/CDU Input Power Fault
RXOTXFC1B21 CU/CDU Park Fault
RXOTXFC1B22 VSWR/Output Power Supervision Lost
RXOTXFC1B23 CU/CDU Reset, Power On
RXOTXFC1B24 CU/CDU Reset, Communication Fault
RXOTXFC1B25 CU/CDU Reset, Watchdog
RXOTXFC1B26 CU/CDU Fine Tuning Fault
RXOTXFC1B27 TX Max Power Restricted
RXOTXFC1B28 CDU High Temperature
RXOTXFC1B29 SCU Voltage Supply Fault
RXOTXFC1B4 TX Antenna VSWR Limits Exceeded
RXOTXFC1B47 TX Auxiliary Equipment Fault
RXOTXFC1B6 TX EEPROM Checksum Fault
RXOTXFC1B7 TX Config Table Checksum Fault
RXOTXFC1B8 TX Synthesizer A/B Unlocked
RXOTXFC1B9 TX Synthesizer C Unlocked
RXOTXFC2A1 TX Diversity Fault
RXORXFC2A1 RX Path loss on A receiver side
RXOTRXFC2A39 RX Cable disconnected14th August 2010 at 17:43 #62660RômuloGuest2a-9 alarm ?
28th September 2010 at 19:51 #62661EDEM STANLEYGuestHi, all
I have an issue to resolve on tma-cm-03 with rbs config 6+6+6, alarm description output voltage fault(the alna/tma voltage has been detected outside allowed range. please advise on what to do, have tried all current range but it still having 0ne led per sector down.8th November 2010 at 19:36 #62662cyGuesti have an alarm on my rbs (2a-1 RX EEPROM Checksum Fault) i have replaces all parts in with where the alarms is coming from. how do i clear this alarm/
19th November 2010 at 11:25 #62663SridharanGuestTRXC :2A-1 (RX eeprom cheksum fault)
The data stored in RXU eeprom is corrupted. This data is needed by TRU SW to perform internal configuration. Probably a HW fault in TRU. Try to power off/on TRU before replacing it. TRXC I2A:123rd November 2010 at 08:48 #62664amitGuestAny buddy can tell me the web site from where I can down load the software (MO Tracker).
(MO TRACKER, it display the cell, BCCH etc on mobile screen.)7th February 2011 at 10:42 #62665Abdul-swamad FadhiliGuestCan anyone illustrate to me which threshold will the ericsson bts issue the battery discharge alarm to the repective BSC?
16th April 2011 at 18:49 #62666RajdeepGuestWhat is the actual reason for alarm
CF 2A – 69 (RBS 6202)
3rd June 2011 at 15:22 #62667akhilesh chaturvediGuestany one tell me which point test in RX diversity alarm
28th June 2011 at 06:52 #62668elijah osiemoGuestfault code 2a
6 Astra-tracy communication fault in reference to rxotrx= what does it represent?29th June 2011 at 04:28 #62669CharlesGuestVSWR limit exceeded….can any one confirm the best solution and proper tests for this
1st September 2011 at 17:13 #62670OLUSOLAGuestI AM HAVING A T147 FAULT CODE ON THE 900BAND OF RBS6102.
WHAT IS THE CAUSE OF THE PROBLEM? -
AuthorPosts
- The forum ‘Telecom Design’ is closed to new topics and replies.