Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

DTM Feature activation in B10

Viewing 6 posts - 46 through 51 (of 51 total)
1 2 3 4
  • Author
    Posts
  • 21st March 2011 at 04:45 #61872
    pix
    Guest

    ds,

    i’ll let the NSN experts answer you…
    since you bought the feature DTM, shouldn’t NSN give you all necessary info to activate it ? I’m surprised they are not providing any support on this.

    23rd March 2011 at 06:06 #61873
    Ds
    Guest

    Hi,

    does anyone has any info regarding the same?

    16th June 2011 at 02:21 #61874
    Hpda
    Guest

    Already read 4 pages of this thread. Thanks to Pix and Bijoy ‘s inform.
    Btw, in my oper has a problem: Currently using DTM (on BSc Ericsson) and when PS handover performed (moving..), the MS is attached to SGSN and MSC with different cell, and MS cannot make a PS call :(. (b/c i know DTM is well done only when MS is served in the same ARFCN).
    Could u pls explain it? Thanks so much.

    18th June 2011 at 12:58 #61875
    pix
    Guest

    hi hpda,

    thanks for reading all of it.
    i’m not familiar with PS Handover. Is it the same as “PS Reselection” ?

    When MS does a PS HO, then the SGSN should synchronize with the MSC/VLR.
    How does your SGSN sync’s with the MSC ? Through Gs interface ?
    I’m afraid you’ll have to check how it is configured, and perhaps run traces. Check how the cell update/RA update/LA update is sent from SGSN to MSC, and vice versa.

    Regards
    pix

    16th March 2012 at 12:30 #61876
    sanja
    Guest

    Hi all,

    I’m trying to validate CS/PS paging coordination. I’ve been trying to find some E/// BSS counters for Gprs suspended session due to CS page (when DTM activated on BSC and cell level), but no success. Any suggestion someone? Maybe I’ve missed something in my search, does anybody is familiar with this? Should I keep on searching? Or there is no such thing?

    Thanks.

    19th November 2013 at 06:18 #61877
    Danish Sharma
    Guest

    Will DTM functionality work if this is activated in BSC only means not activated at MSC end?

    BSC and MSC is of Ericsson Vendor.

  • Author
    Posts
Viewing 6 posts - 46 through 51 (of 51 total)
1 2 3 4
  • The forum ‘Telecom Design’ is closed to new topics and replies.