Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

MS Behavior Modified in TEMS

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 19th March 2010 at 04:47 #61594
    RK
    Guest

    Hi All,
    Can you please let me know what does MS Behavior Modified in TEMS Radio Parameter window means? What should be its value integer or character? Character “C” and “B” means what?

    Hope to get reply soon!
    Thank you all!

    19th March 2010 at 08:22 #61595
    AliAsgher
    Guest

    Dear RK,

    MS Behavior Modified indicates whether the phone’s behavior has been changed from the default.

    B: Modification is not related to channel selection (means changes are related to Multiband reporting, cell adjacent scan, forced power class, Band locking, channel quality)

    C: Modification is related to channel selection (cell bar ignor, target / prevent HO etc)

    G: Modification of GPRS related behavior. (Forced GPRS, multislot class etc.

    Regards,

    20th March 2010 at 17:33 #61596
    RK
    Guest

    Thanks Ali,
    Well, the definition is in Tems itself. But the problem is in ZTE equipment, than It cannot HO from 1800 to 900 band of same cell same site….n MS behavior modified is C…..In Omcr, it all ok…..dilema…

    7th January 2016 at 03:42 #61597
    Ghauri
    Guest

    hy..what is difference b/w Azimuth and Bore??
    how can we see the hopping freq. on which the call is going on..??

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.