Erlang software tools...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

call tracing

Viewing 14 posts - 1 through 14 (of 14 total)
  • Author
    Posts
  • 5th January 2010 at 07:18 #60576
    pc
    Guest

    what is the main signals have to concider when call tracing

    7th January 2010 at 02:32 #60577
    pc
    Guest

    plz is there any body to help me

    7th January 2010 at 17:40 #60578
    Pan
    Guest

    Dear PC!
    On which interface you have done your call tracing and what protocols are subjects in point? In other words, what is your goal? 🙂

    13th January 2010 at 04:28 #60579
    pc
    Guest

    HI pan
    The Call tracing for one of the event for optimization processe.
    Main iterface is
    MS – BTS and
    BTS – BSC after
    BSC – MSC
    So pls Help.

    16th January 2010 at 14:40 #60580
    Pan
    Guest

    For which events? Mobility management? Call Management? Radio Resourse Management? Or may be you are interested in layer2 events?
    B.R.

    18th January 2010 at 02:48 #60581
    pc
    Guest

    Hi Pan
    thats all of four.
    Mobility Mag,Call Mag,Radio Resourse Mag and Layer 2 events.
    Thank you

    18th January 2010 at 04:08 #60582
    Pan
    Guest

    Hi, pc! I don’t understand what you want.
    You may see “the main signals” of MM and CM in 24.008.. and “the main signals” of RR in 44.018.. and “the main signals” of Layer2 protocol on RF interface in 44.005 and 44.006 spec’s.
    BR 🙂

    18th January 2010 at 09:05 #60583
    Pc
    Guest

    Hi Pan
    it is like this
    we are calling to many MS, Ex ; land line.you can record all those call in NMS so then we are analzising those signals to pertculer number. so at that time which signals we have to concider.(the which signals should be there of not there)

    18th January 2010 at 09:40 #60584
    C300G
    Guest

    pc, from what point of view “main”? For call analysis in some situations you might be need all CC-signaling.

    18th January 2010 at 10:34 #60585
    pc
    Guest

    hi C300G
    to complet the one singal call, these signals should be there.
    What those signals and isthere any importan signals.Ex SDCCH.

    18th January 2010 at 11:13 #60586
    C300G
    Guest

    IMHO it would be something like that:
    For basic call CC-tracing:
    SETUP
    DISCONNECT
    RELEASE
    ALERTING
    CALL CONFIRMED
    CALL PROCEEDING
    CONNECT
    CONNECT ACKNOWLEDGE
    EMERGENCY SETUP
    RELEASE COMPLETE

    Less useful:
    START_DTMF
    STOP_DTMF
    STOP_DTMF_ACKNOWLEDGE
    START_DTMF_ACKNOWLEDGE
    START_DTMF_REJECT
    STATUS
    STATUS_ENQUIRY
    FACILITY
    HOLD
    HOLD_ACKNOWLEDGE
    HOLD_REJECT
    RETRIEVE
    RETRIEVE_ACKNOWLEDGE
    RETRIEVE_REJECT

    Rare:
    PROGRESS
    CC_ESTABLISHMENT
    CC_ESTABLISHMENT_CONFIRMED
    RECALL
    START_CC
    MODIFY
    MODIFY_COMPLETE
    MODIFY_REJECT
    USER_INFORMATION
    CONGESTION_CONTROL
    NOTIFY

    18th January 2010 at 12:09 #60587
    pc
    Guest

    HI C300G
    Thank you Very Much.If you can give me like this
    1)sdcch
    2) Paging
    3)FACH…………….so on.
    If you can explain how above CH and signal beheviaer with the call that’s very sound to me to do the optimization.

    18th January 2010 at 12:50 #60588
    C300G
    Guest

    I don’t quite understand what should I give, sorry.
    Are You asking about channel allocation for basic call or what?

    19th January 2010 at 02:42 #60589
    pc
    Guest

    HI C300G
    Yes thats right.

  • Author
    Posts
Viewing 14 posts - 1 through 14 (of 14 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.