Erlang software tools...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

what this mean

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • 28th December 2009 at 09:13 #60519
    mesfer
    Guest

    hi all
    thanks advance to help me
    I want know what this mean??
    1-FRL/FRU parameter changes(waht this parameter and what its related between this with CSSR And TCH BL
    2-Change DMAX (what this and what the the relate with “To reduce cell access from fringe areas”)
    3-IHRF Change required(what this and what the relate with “To reduce TCH blocking”)
    4-Change ADCE parameter (what this and what the relate with “To improve HOSR.”

    thanks

    I waiting our engineer special eng.PIX

    🙂

    29th December 2009 at 21:18 #60520
    pix
    Guest

    mesfer,

    i know only the alcatel parameters…
    i don’t know about the acronyms you wrote… sorry I can’t help you 😉

    -pix

    16th December 2010 at 05:36 #60521
    Rashmi
    Guest

    Hi mesfer,
    FRL is a limit when resources reduced, HR triggers and similarly when the availability of resouces available back then after FRU limit HR triggers back to FR TCH.

    rgds
    rashmi

    16th December 2010 at 12:46 #60522
    Tanuj
    Guest

    Hi Mesfer
    Basically these are for implementing Dynamic Half Rate,
    FRL – the % when the available TCH is used up, suppose if its 60% and the cell has 2 TRX ie around 13 usable FR TS so when 60% of 13 = around 7 or 8 TCH are in use then BSC will dynamically start converting the FR TS to HR RS. since i am not familiar with your specific vendor there will be another parameter which will specify the holding time of converted HR TS and another parameter to convert them back to FR when congestion gets over

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.