Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

2G Classmark change

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • 17th December 2009 at 16:15 #60337
    Pawel
    Guest

    Dear all,

    do you know where can I find description of Classmark Change message sent by MS to the network?

    17th December 2009 at 16:16 #60338
    Pawel
    Guest

    ps. more detailed description than is TS 44.018

    18th December 2009 at 06:39 #60339
    Bijoy
    Guest

    Pawel
    You can refer Drive test logs for message details

    Br\\
    Bijoy

    18th December 2009 at 08:17 #60340
    Pawel
    Guest

    There are just names of parameters with their values. There is no explanation in tools collecting logs which I am using.

    BR,
    Pawel

    18th December 2009 at 08:50 #60341
    Bijoy
    Guest

    Hi
    Let me know the parameters,I’ll try my best to provide the detail

    Br\\
    Bijoy

    18th December 2009 at 15:06 #60342
    Pawel
    Guest

    I know, Bijoy, that there are a lot of parameters.If could encode part of them it would be fine for me:

    CLASSMARK_CHANGE
    mob_station_class
    rev_level = 2 (0x2)
    es_ind = 1 (0x1)
    a5_1_alg_sup = 0 (0x0)
    rf_power_cap = 3 (0x3)
    pseudo_sync_cap = 1 (0x1)
    ss_screen_ind = 1 (0x1)
    sm_cap = 1 (0x1)
    vbs = 0 (0x0)
    vgcs = 0 (0x0)
    freq_cap = 1 (0x1)
    class_3_avail = 1 (0x1)
    lcsva_cap = 0 (0x0)
    ucs2 = 0 (0x0)
    solsa = 0 (0x0)
    cmsp = 1 (0x1)
    a5_3_alg_sup = 0 (0x0)
    a5_2_alg_sup = 0 (0x0)
    add_mob_station_class_incl = 1 (0x1)
    add_mob_station_class
    spare_bit0 = 0 (0x0)
    const_110 = 6 (0x6)
    A5 bits struct
    A5/7 = 0 (0x0)
    A5/6 = 0 (0x0)
    A5/5 = 0 (0x0)
    A5/4 = 0 (0x0)
    Associated Radio Capability 2 = 1 (0x1)
    Associated Radio Capability 1 = 4 (0x4)
    r_support_present = 0 (0x0)
    hscsd_multi_slot_capability_present = 0 (0x0)
    UCS2 treatment = 0 (0x0)
    Extended Measurement Capability = 0 (0x0)
    ms_measurement_capability_present = 0 (0x0)
    ms_positioning_method_capability_present = 0 (0x0)
    ecsd_multi_slot_capability_present = 0 (0x0)
    gsm_8_psk_struct_present = 1 (0x1)
    gsm 8-PSK Struct
    Modulation Capability = 1 (0x1)
    gsm_8_psk_rf_power_capability_1_present = 1 (0x1)
    gsm 8-PSK RF Power Capability 1 = 2 (0x2)
    gsm_8_psk_rf_power_capability_2_present = 1 (0x1)
    gsm 8-PSK RF Power Capability 2 = 2 (0x2)
    gsm_400_bands_supported_present = 0 (0x0)
    gsm_850_associated_radio_capability_present = 1 (0x1)
    GSM 850 Associated Radio Capability = 4 (0x4)
    gsm_1900_associated_radio_capability_present = 1 (0x1)
    GSM 1900 Associated Radio Capability = 1 (0x1)
    UMTS FDD Radio Access Technology Capability = 1 (0x1)
    UMTS 3.84 Mcps TDD Radio Access Technology Capability = 0 (0x0)
    CDMA 2000 Radio Access Technology Capability = 0 (0x0)
    dtm_gprs_multi_slot_class_present = 1 (0x1)
    DTM GPRS Multi Slot Class = 3 (0x3)
    Single Slot DTM = 0 (0x0)
    dtm_egprs_multi_slot_class_present = 1 (0x1)
    DTM EGPRS Multi Slot Class = 3 (0x3)
    single_band_support_present = 0 (0x0)
    gsm_750_associated_radio_capability_present = 0 (0x0)
    UMTS 1.28 Mcps TDD Radio Access Technology Capability = 0 (0x0)
    GERAN Feature Package 1 = 1 (0x1)
    extended_dtm_gprs_multi_slot_class_present = 0 (0x0)
    high_multislot_capability_present = 0 (0x0)
    geran_iu_mode_capabilities_present = 0 (0x0)
    GERAN Feature Package 2 = 0 (0x0)
    GMSK Multislot Power Profile = 0 (0x0)
    gsm 8-PSK Multislot Power Profile = 0 (0x0)
    t_gsm_400_bands_supported_present = 0 (0x0)
    t_gsm_900_associated_radio_capability_present = 0 (0x0)
    Downlink Advanced Receiver Performance = 0 (0x0)
    DTM Enhancements Capability = 0 (0x0)
    dtm_gprs_high_multi_slot_class_present = 0 (0x0)
    Repeated ACCH Capability = 0 (0x0)
    spare_bits0_count = 1 (0x1)
    spare_bits0 = 0 (0x0)

    21st December 2009 at 05:24 #60343
    Bijoy
    Guest

    Oh!!!
    Pawel,many of the parameters are self explainatory,like es_ind,rf_power_cap etc etc.Name only those which bothers you the most

    Br\\
    Bijoy

    21st December 2009 at 15:52 #60344
    Pawel
    Guest

    Dear Bijoy,

    please let me know where I can find description of below parameters.

    BR,
    Pawel

    18th July 2011 at 06:39 #60345
    N.Selvakumar
    Guest

    Hi,..

    Can anyone tell in which practical scenario classmark change comes under the picture.

    I know what is the use of classmark. But why classmark change procedure required while location update or CM procedure is ongoing.

    Regards
    selva n

    18th July 2011 at 07:53 #60346
    pix
    Guest

    hi,

    The MS sends this message to the network, to list all its capabilities. The network is then aware of what the MS can or cannot do.

    Regards
    pix

    18th July 2011 at 11:00 #60347
    Selvakumar N
    Guest

    Hi Mr.PIX,

    I know what is classmark. But sometimes classmark change is come under the picture, when at all MS change its capabilities (like Band info, addition of power amplification). How come it changes band info and add the power amplification. That is what i thought to ask. Can you any practical scenario, why it is doing addition of power amplification

    Regards,
    Selva N

    18th July 2011 at 11:04 #60348
    N.Selvakumar
    Guest

    When at all it needs to change the classmark. Why it needs to change Band info and addition of power amplification

    20th July 2011 at 08:36 #60349
    Pix
    Guest

    Hi,

    I don’t know. It’s part of the standard procedure, you’d have to check 3GPP on that one…

    1st October 2015 at 10:30 #60350
    ankit.singhal85@yahoo.com
    Guest

    where you seen this parameters?
    As i am using the TEMS release 5,
    the information of repeated SACCH(ACCH capability) is not indicated there.
    So, can u suggest the tool, where i see these parameters.

    15th July 2022 at 08:01 #102105
    SidB
    Guest

    I understand that to prevent attacks on A5/3, networks have started rejecting classmark change requests (sent from a fake MS) to A5/1. Would like to understand if this is true (at least on some parts of the world) and whether this is a directive to be fulfilled by all operators by a specific date.

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 15 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.