Erlang software tools...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

GSM DUAL BAND NETWORK

Viewing 12 posts - 16 through 27 (of 27 total)
1 2
  • Author
    Posts
  • 12th December 2009 at 07:30 #60118
    Bijoy
    Guest

    You already helped them a lot dear.

    13th December 2009 at 14:31 #60119
    Mak
    Guest

    HI Bijoy,

    I think you can elaborate some more point on this discussion.

    Thanks

    15th December 2009 at 04:34 #60120
    Bijoy
    Guest

    Ok Mac
    If you insist.
    If you enable enhanced Dual Band,you will hve two parameters,namely
    1.Incoming OL Subcell HO level Threshold(dB)
    2.Outgoing OL Subcell HO level Threshold(dB)

    Try this.

    Br\\
    Bijoy

    17th December 2009 at 07:41 #60121
    Mak
    Guest

    Hi Bijoy,

    Generally I have seen a dual band network like 900 band works as a BCCH and 1800 band as a TCH.

    But here in the network of Huwaie both the band are working in BCCH and TCH.

    We have a basic network over here.
    NO hopping is used. No Amr is working. we don’t have enhanced dual band features. Overlay and underlay features are not working.

    We are only using inter layer handovers. In which handover from 900 to 1800 are happening easily. But when MS takes the handover on 1800 it does not give the handover to 900 cell.

    there is a one more interesting thing. We don’t have the continuous cells of 900 and 1800 band.

    17th December 2009 at 08:44 #60122
    Bijoy
    Guest

    Ok MAC
    Let me know the following parameter settings:
    1.Inter-layer HO Threshold
    2.Inter-layer HO Hysteresis
    3.Adjacent Cell Inter-layer HO Hysteresis.

    17th December 2009 at 08:46 #60123
    John
    Guest

    hi mak
    would you please send me the document that AliAsgher sent to you i really need it please.

    17th December 2009 at 12:23 #60124
    mak
    Guest

    hi jhon,

    pls provide your mail id

    18th December 2009 at 08:20 #60125
    John
    Guest

    hi mak
    john198152@yahoo.com

    21st December 2009 at 14:30 #60126
    Mak
    Guest

    Hi John,

    I have mailed you the doc.

    Thanks to AliAsgher.

    21st December 2009 at 20:51 #60127
    Jeff
    Guest

    Hi Mak and Co.
    is that document different from the one we get from LMT help??
    To my understand the Huawei LMT help explains about each parameter. Just press F1 then search for the parameter.
    Correct me if i’m wrong

    22nd December 2009 at 08:31 #60128
    John
    Guest

    thank you dear

    23rd December 2009 at 17:16 #60129
    Faares
    Guest

    oh , very interesting discussion is going on here ,

    Mak Or john can any one of u send me those document. i need it too

    thanks in advance
    my email m_a_h2000@hotmail.com

  • Author
    Posts
Viewing 12 posts - 16 through 27 (of 27 total)
1 2
  • The forum ‘Telecom Design’ is closed to new topics and replies.