- This topic has 3 replies, 1 voice, and was last updated 14 years, 10 months ago by
.
-
Posts
-
I just turned up a Nokia BTS in the 1900 MHz GSM/UMTS site near the local airport and have seen some interference issues coming off of this sector. The UL Qual is quite poor even with a GMA installed. Has anyone come across a similar situation near air terminals?
Hi,
No… Are those are not interferences from your other BTS ? Have you tried changing frequencies ?
If you get interference from an airport equipment, then you’re also probably interfering it. Which is rather worrying 🙂
Thanks for the feedback Pix. I think you may be on to something. There are about six sectors within proximity to this area. Recently I turned down several radios on an adjacent site and saw about a 1.5% reduction in DCR for the affected site. The BCCHs, BSIC, and HSN are all different for the sectors but it looks like there may be some collisions. Should I adjust the MAIO settings to avoid hopping collisions as a start?
Maio will not help, because those sites are not synchronized.
As long as HSN is different, then it should be fine.To be clear in SFH 1×1:
– cells within same BTS : same HSN but different MAIO per TRX
– neighbour cells from different BTS : different HSN, MAIO has no influence here.
- The forum ‘Telecom Design’ is closed to new topics and replies.
