Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

BTS AND TC

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • 8th November 2009 at 06:43 #59522
    alex
    Guest

    hi all.
    i am new in gsm.
    i have an alarm on my bsc that clears calls on A interface or Abis interface.
    this alarm changes its state (between cancelling an enabling)almost
    every 1 second.
    my vendor is nokia.
    the following alarm:
    2992 BTS AND TC UNSYNCHRONIZATION CLEAR CALLS ON A(or Abis) INTERFACE.
    plese somone help me to fix this alarm.

    9th November 2009 at 05:07 #59523
    Bijoy
    Guest

    Hi Alex.
    For 2992,check for cic mismatch between TC and A-interface.
    For 2993,check for configuration mismatch between OMC and BTS Manager

    9th November 2009 at 18:12 #59524
    alex
    Guest

    hi bijoy
    thanx for your reply.
    by i sead that i am new in gsm.
    please explain for me with detail.
    actually you believe that this alarm fix with correct the Definitions between TC and A (or Abis)interface(software solution)?
    or i have to fix it with check my hardware(TRX,COMBINER,…)?
    meanwhile i had 7745 and 7743 alarm on my bts that have alarm 2993.
    plaese explain me with details.
    thanx

    10th November 2009 at 08:12 #59525
    Bijoy
    Guest

    Hi Alex
    7745 & 7743 mostly comes along with 2993 because call failure rate will be too high for that TRX.
    In Ultrasite BTS Hub Manager,check for TRX bypassing configuration & Cross connection.Also check for incorrect E1 TS bypassing.2993 never comes for any type of H/W fault,it comes only due to configuration mismatch between Site(BTS HUB Manager) & OMC configuration.
    The supplementary info in 2993 alarm will tell you the culprit BTS, TRX & PCM on which it is configured

    10th November 2009 at 10:46 #59526
    alex
    Guest

    thanx alot

    but what about 2992?

    11th November 2009 at 05:53 #59527
    Bijoy
    Guest

    For 2992,check whether all circuits of CGR are created in MSC end also.One way to check is whether the CIC’s indicated in 2992 is created/faulty/blocked on the A-interface also.You can get the CIC & PCM info from the supplementary field

    2nd October 2012 at 15:06 #59528
    sachin
    Guest

    How we can overcome this 2992 alarm and can identify . Can we identify the CIC mismatch or configitaional issue !

    26th February 2020 at 20:26 #71506
    antonio
    Guest

    I need to know what class alarm means:

    (39800) 7789 NO (E)GPRS TRANSACTIONS IN BTS

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.