Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

ericsson power control

  • This topic has 14 replies, 1 voice, and was last updated 12 years ago by Xilinx.
Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • 24th October 2009 at 16:16 #59269
    krish
    Guest

    hi, can anybody help me to reduce tch drop in eric sys thr power control.

    ssdelsul,ssdesdl,qdesdl,qdesul,regintlratio,sachh period.

    Bijoy ur suggestion is require here plz help to understand power control of eric?

    25th October 2009 at 14:29 #59270
    krish
    Guest

    hi,

    guys plz help me in eric power control?

    27th October 2009 at 16:25 #59271
    krish
    Guest

    hi,

    guys plz help me in eric power control?

    12th November 2009 at 18:53 #59272
    Arpan
    Guest

    Firstly find out the reason of Drop that wether it is due to poor quality, low signal strength or it is due to sudden losses..

    You can decrease the value of ssdesul to 100 & ssdesdl to 88 to make the power control more effective. It will lower the overall noise-floor and hence decreases the interference

    You can also adjust the value of quality compensator & Level compensator in accordance with the drop rate reasons..

    13th November 2009 at 05:11 #59273
    Bijoy
    Guest

    Hi Krish
    In Ericsson ,like other vendors there is no power control window,but a specific value,viz,SSDESUL,SSDESDL,QDESUL & QDESDL.Similar parameters are there for AMRFR & AMRHR also.BTS tries to provide SSDESDL & QDESDL to the MS and MS tries to provide SSDESUL & QDESUL to the BTS for the same call.SSDESDL & QDESDL is measured by MS and reported back & then BTS PC takes place accordingly.Similarly SSDESUL & QDESUL is measured by BTS and sent to MS & then MS PC takes place accordingly.QLENUL,SSLENUL,QLENDL & SSLENUL defines for how many SACCH periods the filtering & compensation will be done

    If you need some specific info,let me know

    18th November 2009 at 17:24 #59274
    KRISH
    Guest

    Hi,

    thanks bijoy and arpan.

    Here i have high tch drop in railway cells .for improving tch drop i want to play with htis power control para? so can u help me?

    here i have for example bts power contro seetings are like this.

    ssdesl – -90
    ssdesdlafr – -90
    ssdesdlahr – -88
    and for quality

    qdesl – 30
    qdesdlafr – 40
    qdesdlahr – 30

    so by changing this value at which i can gain imrovement?

    but i have doubt abt lcompdl and qcompdl , regintdl,updownratiodl how i relate this value? bijoy,arpan can u explain this term in simple language.

    and by decreasing sslendl,sslenul,qlendl,qlenul sachh period can i gain in tch drop?

    19th November 2009 at 05:08 #59275
    Bijoy
    Guest

    Krish.
    The values seems quite reasonable.
    I would rather suggest not to play with these parameters much and keep the recommended values only.
    In case you want to improve the TCH Drop,it can be done without changing these parameters too.

    Br\\
    Bijoy

    19th November 2009 at 21:42 #59276
    Pix
    Guest

    Bijoy,

    Can you feel the headache coming back ?
    🙂

    20th November 2009 at 04:59 #59277
    Bijoy
    Guest

    Yeah Bro:-)

    21st November 2009 at 16:53 #59278
    Thomas
    Guest

    Hello pix

    If u don’t want to answer ok but don’t pass comment.this site is for open discussion ok mind it.

    21st November 2009 at 20:41 #59279
    Pix
    Guest

    Thomas,

    This is a web community, not an office. I feel appropriate to write “relaxing” comments once in a while, as long as they are not offending. Aren’t we human after all ? (Well, for Bijoy, I’m not so sure…)

    Krish certainly got his answer, so I don’t see where is the problem. His questions are giving us headaches. That’s a compliment, isn’t it ? 🙂

    Pix

    22nd November 2009 at 14:08 #59280
    Thomas
    Guest

    Hi pix,

    Ok but still i am not getting are u in favour of krish or still passing comment?

    If someone have doubt and u have answer then u should help him and thats the right humanity.

    22nd November 2009 at 17:24 #59281
    krish
    Guest

    hi arapn,thomas

    Thanks for support.

    Hey arpan can u tell me abt lcom,qcom,regint,updownratio?

    23rd November 2009 at 05:12 #59282
    Bijoy
    Guest

    Hi Thomas
    Lets take it easy.We are not making jokes out of anybody neither we have any intent.

    Krish
    No offense meant,dear.Please dont take it personal.We are happy to help you any time

    Br\\
    Bijoy

    4th January 2013 at 16:51 #59283
    Xilinx
    Guest

    Hi,
    I have High TCH Drop in Some CellS due to LOW SS .What should i do.

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 15 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.