Erlang software tools...
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

Configuring IOG 11 to respond FTAM

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • 13th September 2009 at 00:49 #58837
    Dante Salazar
    Guest

    I am working in a project to transmit CDR’s through the TCP/IP network.
    Most of our Ericsson switches have IOG 11.
    First we connected a gateway to the X25 port, to convert X25 to IP
    This seems to be OK.
    Then we configured the FTAM service in IOG 11
    Finally we initiate FTAM sessions from a FTAM client to the port. The session seems to contacts the IOG 11 but the connection is not stablished.

    Can someone give me some ideas?

    29th August 2015 at 12:21 #58838
    Wallis Dudhnath
    Guest

    Not sure whether you have a response yet.
    In the past IOG3, IOG11 and IOG20 were the main IO
    for AXE10. Variants of APG is now the main IO.

    For X25, the IOG used MTP/X25. A X25 Network is required.
    Triple X protocols (X3/25/29) will be used.

    VBR/ Wallis Dudhnath

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • The forum ‘Telecom Design’ is closed to new topics and replies.